I installed Debian on my plug, to an SD card following the instructions
from http://www.cyrius.com/debian/kirkwood/sheevaplug/install.html
The install went fine, but I can't manage to get the last step working,
namely setting the plug up to boot Debian from the SD. I partitioned in
d-i, with a single partition for / plus a swap partition.
Marvell>> setenv bootargs_console console=ttyS0,115200
Marvell>> setenv bootcmd_mmc 'mmcinit; ext2load mmc 0 0x0800000
/boot/uInitrd; ext2load mmc 0 0x400000 /boot/uImage'
Marvell>> setenv bootcmd 'setenv bootargs $(bootargs_console); run
bootcmd_mmc; bootm 0x400000 0x0800000'
Marvell>> run bootcmd
SD found. Card desciption is:
Manufacturer: 0x03, OEM "SD"
Product name: "SU01G", revision 8.0
Serial number: 1091923440
Manufacturing date: 7/2008
CRC: 0x00, b0 = 0
** Invalid partition type "����" (expect "U-Boot")
** Invalid partition type "����" (expect "U-Boot")
## Booting image at 00400000 ...
Bad Magic Number
Marvell>>
U-Boot 1.1.4 (Sep 14 2009 - 15:36:37) Marvell version: 3.4.19
--
Jonas Häggqvist
rasher(at)rasher(dot)dk
--
To UNSUBSCRIBE, email to debian-arm-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
