Zafod Biblbrox wrote: > Hi all, > > I'm trying to do a net boot on a nforce3 chipset (uses sata_nv module) with > Seagate 160GB SATA drive, but the drive is not recognized: > > > ata1 is slow to respond, please be patient > > ata1 failed to respond (30 secs) > > I have googled for help and have found out, that the same problem has been > noticed with FC3. They seem to have found a fix in the bug > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=140367, but the > proposed fixes are probably not applied to the install kernel. > > Do you have any suggestions how to overcome this problem? > > juraj > >
I've been booting from SATA using the nforce3 controller since 2.6.10 - no problems at all. [EMAIL PROTECTED]:~$ lspci | grep Serial 0000:00:09.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) 0000:00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2) >From looking at the bugzilla, it seems to be an old kernel bug. What kernel are you running? Have you tried upgrading? -Corey -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
