Am 20.03.2017 um 01:52 schrieb Finn Thain: > On Fri, 17 Mar 2017, I wrote: > >> I've just uploaded a new kernel build to the Linux Mac68k sourceforge >> project: https://sourceforge.net/projects/linux-mac68k/files/ >> >> This build has some patches for the mac_scsi and egret drivers that were >> backported from mainline v4.11-rc1. For machines that need those drivers >> (LC III etc.) this build should work better than previous releases. >> Please let me know if you encounter any regressions. >> >> AFAIK, no Macs should need v2.x unless they need the SMC9194 Nubus >> network card driver. For some reason that driver only appeared in the >> v2.2 branch in the mac68k CVS and never in mainline Linux. It isn't >> likely to get a modern rewrite any time soon so I recommend replacing >> those cards and running v4.x on any 68k Mac. >> > > I've uploaded a second test kernel build. This one includes my patch queue > https://github.com/fthain/linux/commits/mac68k-queue > > Apart from these 28 patches this build is exactly the same as the build on > sourceforge described above. It can be downloaded here, > > https://www.telegraphics.com.au/~fthain/mac68k-queue/vmlinux-4.1.39-mac_scsi-egret-etc+ > https://www.telegraphics.com.au/~fthain/mac68k-queue/linux-m68k-image-4.1.39-mac_scsi-egret-etc+.tar.gz
Hi there, we tested this kernel today on a Performa 450 (aka LC3) ADB works nice, dmesg shows that the kernel detected our network card (Nubus Slot E, Mac LC Ethernet Adapter, Board_ID 0x2e) Its an "Asante" card, but ifconfig shows only loopback device. The modules had been unpacked beforehand. Is this expected behaviour? Best regards, Stefan & Carsten
