On Wed, May 16, 2007 at 01:53:34PM +0200, Christian T. Steigies wrote: > Hi, > I finally managed to build 2.6.21 for m68k, images are available for testing > from here: > > http://people.debian.org/~cts/linux-m68k/ > > Christian > Thanks very much for doing that!
q: When I try to boot using your 2.6.21, there are complaints about not having a modules.dep file. How may I generate it? I'm running under it as I write, and attach the dmesg output on your account. -- Location: 43 58 8 N by 80 58 45 W Growing zone: lowest 48-hour temperature -25C Built: 1835 Renovations: 1910, 1952, 2006.
Linux version 2.6.21-1-mac (Debian 2.6.21-1~experimental.1) ([EMAIL PROTECTED]) (gcc version 3.3.6 (Debian 1:3.3.6-15)) #1 Wed May 16 00:44:14 CEST 2007 Detected Macintosh model: 53 Penguin bootinfo data: Video: addr 0xf9001000 row 0x400 depth 8 dimensions 640 x 480 Videological 0xf0001000 phys. 0xf9001000, SCC at 0x50f0c020 Boottime: 0x464b2baa GMTBias: 0xfffffed4 Machine ID: 53 CPUid: 0x2 memory size: 0x44 VIA1 at 50f00000 is a 6522 or clone VIA2 at 50f02000 is a 6522 or clone Apple Macintosh Quadra 610 On node 0 totalpages: 17408 DMA zone: 153 pages used for memmap DMA zone: 0 pages reserved DMA zone: 17255 pages, LIFO batch:3 Normal zone: 0 pages used for memmap Built 1 zonelists. Total pages: 17255 Kernel command line: root=/dev/sdb4 Killing onboard sonic... Done. PID hash table entries: 512 (order: 9, 2048 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 66176k/66188k available (2188k kernel code, 1136k data, 120k init) Calibrating delay loop... 16.43 BogoMIPS (lpj=82176) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 NET: Registered protocol family 16 NuBus: Scanning NuBus slots. SCSI subsystem initialized NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) macfb: framebuffer at 0xf9001000, mapped to 0xd0001000, size 480k macfb: mode is 640x480x8, linelength=1024 macfb: scrolling: redraw fbcon_startup: No VBL detected, using timer based cursor. free_irq: Removing probably wrong IRQ 9 Console: switching to colour frame buffer device 80x30 fb0: Macintosh DAFB built-in frame buffer device RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Checking for internal Macintosh ethernet (SONIC).. yes sonic.c:v0.92 20.9.98 [EMAIL PROTECTED] macsonic.0: onboard / comm-slot SONIC at 0x50f0a000 macsonic.0: revision 0x0004, using 32 bit DMA and register offset 2 eth0: MAC 08:00:07:86:8a:f0 IRQ 3 input: Macintosh mouse button emulation as /class/input/input0 adb: Mac II ADB Driver v1.0 for Unified ADB Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx adb: starting probe task... mac_esp: io base at 0x50f10000 esp: using quick version esp: addr at 0x50f10000 SCSI ID 7 Clk 16MHz CCF=4 TOut 138 NCR53C9x(esp236) mac_esp: 1 esp controllers found scsi0 : ESP236 (NCR53C9x) scsi 0:0:0:0: Direct-Access QUANTUM LPS340S 020B PQ: 0 ANSI: 2 CCS scsi 0:0:1:0: Direct-Access FUJITSU MAH3091MS 0115 PQ: 0 ANSI: 4 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 scsi: waiting for bus probes to complete ... adb devices: [2]: 2 2 [3]: 3 32 [15]: 3 1 SCSI device sda: 670506 512-byte hdwr sectors (343 MB) sda: Write Protect is off sda: Mode Sense: 91 00 00 08 SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 670506 512-byte hdwr sectors (343 MB) sda: Write Protect is off sda: Mode Sense: 91 00 00 08 SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: [mac] sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 17850264 512-byte hdwr sectors (9139 MB) sdb: Write Protect is off sdb: Mode Sense: ab 00 10 08 SCSI device sdb: write cache: enabled, read cache: enabled, supports DPO and FUA SCSI device sdb: 17850264 512-byte hdwr sectors (9139 MB) sdb: Write Protect is off sdb: Mode Sense: ab 00 10 08 SCSI device sdb: write cache: enabled, read cache: enabled, supports DPO and FUA sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 ADB keyboard at 2, handler 1 Detected ADB keyboard, type ANSI. input: ADB keyboard as /class/input/input1 sd 0:0:1:0: Attached scsi disk sdb kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. ADB mouse at 3, handler 1 input: ADB mouse as /class/input/input2 ADB mouse at 15, handler 1 input: ADB mouse as /class/input/input3 adb: finished probe task... Adding 733120k swap on /dev/sdb5. Priority:-1 extents:1 across:733120k EXT3 FS on sdb4, internal journal
