Hi! you wanted some information about my turbo board. Well here is it:
The board is a E-Matrix 530 for Amiga 500. 68030 & 68882 @ 50 mhz, PS/2 ram up to 128 MB, kickrom socket IDE controller: gayle Fast SCSI-II controller: NCR, 53CF94-2 Note: not all boards are with the SCSI controller. On my board is 24 MB and a 3.1 kickrom. There is no driver needed, it's plug n play. The amiboot line: "amiboot-5.6 --model 5 -d -k linux.bin ro root=/dev/hda4 video=amifb:pal nolangchooser ide=doubler" The kernel can't find the IDE controller without the "--model 5" flag. Here is some more info: SysInfo V3.24: -------------- |Board Address|Board Size|Board Type|Product|Manufacturer|Serial No| |-------------+----------+----------+-------+------------+---------| |$00E90000 | 64 K | ZORRO II | 36 | 2192 | 0 | |$00EA0000 | 64 K | ZORRO II | 33 | 2192 | 0 | What the kernel says: Searching for SAVEKMSG magic... Found 2787 bytes at 0x000e0008 >>>>>>>>>>>>>>>>>>>> Linux version 2.2.20 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Mon Mar 11 23:09:50 GMT 2002 Amiga hardware found: [A1200] VIDEO BLITTER AUDIO FLOPPY A1200_IDE KEYBOARD MOUSE SERIAL PARALLEL A2000_CLK CHIP_RAM PAULA AGNUS_HR_PAL PCMCIA ZORRO ide: Enabled support for IDE doublers Console: colour dummy device 80x25 Calibrating delay loop... 12.36 BogoMIPS Memory: 22708k/24576k available (1260k kernel code, 532k data, 76k init) Dentry hash table entries: 4096 (order 3, 32k) Buffer cache hash table entries: 32768 (order 5, 128k) Page cache hash table entries: 8192 (order 3, 32k) kmem_create: Forcing size word alignment - filp VFS: Diskquotas version dquot_6.4.0 initialized kmem_create: Forcing size word alignment - dquot POSIX conformance testing by UNIFIX Zorro: Probing AutoConfig expansion devices: 2 devices Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 kmem_create: Forcing size word alignment - sock kmem_create: Forcing size word alignment - skbuff_head_cache NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP kmem_create: Forcing size word alignment - tcp_open_request kmem_create: Forcing size word alignment - tcp_tw_bucket TCP: Hash tables configured (ehash 32768 bhash 32768) Initializing RT netlink socket Starting kswapd v 1.5 Console: switching to colour frame buffer device 80x32 fb0: Amiga OCS frame buffer device, using 256K of video memory clgen: Driver for Cirrus Logic based graphic boards, v1.4 ? clgen: no supported board found. M68K Serial driver version 1.01 ttyS0 at 0x80dff018: Amiga builtin pty: 256 Unix98 ptys configured Amiga mouse installed. RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 ide0: Gayle IDE interface (A1200 style) ide1: IDE doubler +++ Probing for IDE doubler... probe returned 0xffff (PLEASE REPORT THIS!!) hda: Maxtor 2F040J0, ATA DISK drive hdb: IOMEGA ZIP 100 ATAPI Floppy, ATAPI FLOPPY drive hdc: HITACHI CDR-7730, ATAPI CDROM drive ide0 at 80da0000 on irq 0x0000000c ide1 at 80da1000 on irq 0x0000000c (shared with ide0) hda: Maxtor 2F040J0, 39205MB w/2048kB Cache, CHS=4998/255/63 hdc: ATAPI 4X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 FD: probing units found <5>fd: drive 0 didn't identify, setting default ffffffff fd0 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 scsi : 0 hosts. scsi : detected total. Partition check: hda: RDSK hda1 hda2 hda3 hda4 hda5 VFS: Mounted root (ext2 filesystem) readonly. Warning: unable to open an initial console. Adding Swap: 463628k swap-space (priority -1) hdb: No disk in drive hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm hdb: The drive reports both 100663296 and 0 bytes as its capacity Restarting system. <<<<<<<<<<<<<<<<<<<< That should be enough ;) cu Stefan Pietzonke
