Roel, There are a few files new files that need to be added to cvs with this patch, and a few that can be removed. The ones to add:
acconfig.h acinclude.m4 config.in dbmail.h To remove: config.h settings.h buildtools/Makefile.am buildtools/aclocal.m4 buildtools/confdefs.h buildtools/config.cache buildtools/config.log buildtools/configure buildtools/configure.in Thanks, Jesse ---- Original Message ---- From: Roel Rozendaal - IC&S <dbmail@dbmail.org> To: dbmail@dbmail.org Subject: Re: [Dbmail] autoconf update [PATCH] Sent: Mon, 17 Mar 2003 17:08:01 +0100 > missed that -p1, sorry :-) > > patches have been applied & committed > > regards roel > > Jesse Norell heeft op maandag, 17 maa 2003 om 16:59 (Europe/Amsterdam) > het volgende geschreven: > > > > > Hello Roel, > > > > I just grabbed cvs source, and the patch applied clean: > > > > mail2:/usr/src/dbmail# ./grab_latest_cvs > > > > Press [Enter] at 'CVS password:' prompt > > > > Logging in to :pserver:[EMAIL PROTECTED]:2401/cvsroot-dbmail > > CVS password: > > Got latest cvs code - in directory dbmail-20030317 > > mail2:/usr/src/dbmail# cd dbmail-20030317/ > > mail2:/usr/src/dbmail/dbmail-20030317# patch -p1 < > > ../dbmail-autoconf_update+md5+pbsp+unique_id.patch > > patching file INSTALL > > patching file Makefile.am > > patching file Makefile.concept > > patching file Makefile.in > > patching file Makefile.mysql > > patching file Makefile.pgsql > > patching file acconfig.h > > patching file acinclude.m4 > > patching file aclocal.m4 > > patching file auth.h > > patching file bounce.c > > patching file bounce.h > > patching file build.sh > > patching file buildtools/Makefile.am > > patching file buildtools/aclocal.m4 > > patching file buildtools/confdefs.h > > patching file buildtools/config.log > > patching file buildtools/configure > > patching file buildtools/configure.in > > patching file buildtools/mkinstalldirs > > patching file clientinfo.h > > patching file config.c > > patching file config.h > > patching file config.in > > patching file configure > > patching file configure.in > > patching file db.h > > patching file dbmail.h > > patching file dbmailtypes.h > > patching file dbmd5.c > > patching file dbmd5.h > > patching file dbmsgbuf.h > > patching file dbsearch.h > > patching file dbtest.c > > patching file debug.c > > patching file debug.h > > patching file forward.c > > patching file forward.h > > patching file imap4.c > > patching file imap4.h > > patching file imapcommands.c > > patching file imapcommands.h > > patching file imapd.c > > patching file imaputil.c > > patching file imaputil.h > > patching file injector.c > > patching file list.c > > patching file list.h > > patching file main.c > > patching file main.h > > patching file maintenance.c > > patching file maintenance.h > > patching file man/dbmail-adduser.1 > > patching file mbox2dbmail.c > > patching file md5.c > > patching file md5.h > > patching file memblock.c > > patching file memblock.h > > patching file mime.c > > patching file mime.h > > patching file mini-injector.c > > patching file misc.c > > patching file misc.h > > patching file mysql/Makefile.in > > patching file mysql/dbauthmysql.c > > patching file mysql/dbmsgbufmysql.c > > patching file mysql/dbmysql.c > > patching file mysql/dbsearchmysql.c > > patching file pgsql/Makefile.am > > patching file pgsql/Makefile.in > > patching file pgsql/dbauthpgsql.c > > patching file pgsql/dbmsgbufpgsql.c > > patching file pgsql/dbpgsql.c > > patching file pgsql/dbsearchpgsql.c > > patching file pipe.c > > patching file pipe.h > > patching file pop3.c > > patching file pop3.h > > patching file pop3d.c > > patching file proctitleutils.c > > patching file proctitleutils.h > > patching file quota.c > > patching file quota.h > > patching file raw-convert.c > > patching file rfcmsg.c > > patching file rfcmsg.h > > patching file server.c > > patching file server.h > > patching file serverchild.c > > patching file serverchild.h > > patching file settings.c > > patching file settings.h > > patching file smtp-convert.c > > patching file sql/mysql/create_tables.mysql > > patching file sql/mysql/create_tables_innoDB.mysql > > patching file sql/mysql/md5_alter_users.mysql > > patching file sql/postgresql/create_tables.pgsql > > patching file sql/postgresql/md5_alter_users.7.3-pgsql > > patching file sql/postgresql/md5_alter_users.pre_7.3-pgsql > > patching file sql/postgresql/no-constraint-tables.pgsql > > patching file sql/postgresql/pop_before_smtp.pgsql > > patching file sstack.c > > patching file sstack.h > > patching file user.c > > patching file user.h > > patching file vut2dbmail.c > > mail2:/usr/src/dbmail/dbmail-20030317# > > > > > > Also, the additional paths Ryan was asking about are included in > > this patch, so it won't apply clean if they're already included > > (ie. don't apply the other patch, just this one). > > > > Thanks, > > Jesse > > > > > > > > ---- Original Message ---- > > From: Roel Rozendaal - IC&S <dbmail@dbmail.org> > > To: dbmail@dbmail.org > > Subject: Re: [Dbmail] autoconf update [PATCH] > > Sent: Mon, 17 Mar 2003 10:31:54 +0100 > > > >> Hi Jesse, > >> > >> the patches you send do not apply straight away - could you check them > >> against current cvs? thanks! > >> > >> roel > >> > >> > >> Jesse Norell heeft op vrijdag, 7 maa 2003 om 23:55 (Europe/Amsterdam) > >> het volgende geschreven: > >> > >>> Hello, > >>> > >>> Ok, here's that autoconf update + md5 password patch + pbsp > >>> and unique_id fixes for using multiple dbmail servers. I've > >>> tested building pgsql and mysql via build.sh and configure > >>> on i386, and tested pgsql on a Sparc. The only caveat I found > >>> was that md5 password hashes don't work if you don't link in > >>> a libcrypt, which is not the default. It'd be nice to make > >>> autoconf test if your crypt() supports md5 or not and link it > >>> in if so.. but that's not done. Another idea would be a "migration" > >>> mode you could turn on so, eg., if you have crypt passwords and > >>> want to migrate to md5 hashes, it'll happen automatically, but > >>> I didn't do that either :). And to answer your question, yes, > >>> both mysql and pgsql have been updated for all functionality. > >>> > >>> > >>> Some notes on the changes for those familiar w/ looking through > >>> the files: > >>> > >>> - aclocal.m4 is automatically generated from acconfig.h > >>> (when you run aclocal) > >>> - the old config.h is now dbmail.h, and this actually uses > >>> automake's config.h - also, all .h and .c files have been > >>> updated to include "config.h" (if HAVE_CONFIG_H is defined, > >>> which it is when you run ./configure), so even though most > >>> of them don't check autoconf-defined values now, they're > >>> ready for it in the future. > >>> - both the <endian.h> check and <crypt.h> (for FreeBSD problem) > >>> are handled by autoconf now. I don't have a FreeBSD box to > >>> test that, but I don't think there should be a problem. > >>> - settings.h is gone - it only had one setting, the default > >>> location of the config file, and that's been more appropriately > >>> put in dbmail.h, as more than one program need to know that. > >>> > >>> This patch is against dbmail 1.1, which was still the same as cvs > >>> as of this morning. Hollar with questions/problems/etc. > >>> > >>> Thanks, > >>> Jesse > >>> > >>> > >>> ---- Original Message ---- > >>> From: Eelco van Beek - IC&S <dbmail@dbmail.org> > >>> To: dbmail@dbmail.org > >>> Subject: Re: [Dbmail] autoconf update > >>> Sent: Fri, 7 Mar 2003 21:48:34 +0100 > >>> > >>>> Hi Jesse, > >>>> > >>>> Thanks for all your work. :) > >>>> Did you made the changes regarding the pbdp in all the driver files? > >>>> Could you add them to your next email? > >>>> > >>>> Thanks, > >>>> > >>>> Eelco > >>>> > >>>> On vrijdag, maa 7, 2003, at 19:13 Europe/Amsterdam, Jesse Norell > >>>> wrote: > >>>> > >>>>> > >>>>> Hello, > >>>>> > >>>>> Keep hitting enter on the Subject line, and firing off blank > >>>>> emails... sorry. > >>>>> > >>>>> I'm about to post an update to the autoconf setup which handles > >>>>> the endian.h check and FreeBSD's lack of crypt.h via the configure > >>>>> script, as well as a few misc. fixes. Ryan looked over it and > >>>>> thought > >>>>> it looked good. Was wondering (from Eelco/Roel) if you 'd want to > >>>>> include the md5 hash support in it or leave that seperate (in which > >>>>> case I'll have to generate yet another patch for it...). Also, > >>>>> I've > >>>>> got patches updated which make pbsp use the database server's time > >>>>> rather than the pop3/imap server (for using multiple dbmail servers > >>>>> off one database), and makes the unique_id more unique (there were > >>>>> major problems using simultaneous dbmail servers to one database). > >>>>> Would you want them included as well? > >>>>> > >>>>> Jesse > >>>>> > >>>>> > >>>>> -- > >>>>> Jesse Norell > >>>>> [EMAIL PROTECTED] > >>>>> _______________________________________________ > >>>>> Dbmail mailing list > >>>>> Dbmail@dbmail.org > >>>>> https://mailman.fastxs.nl/mailman/listinfo/dbmail > >>>>> > >>>> _________________________ > >>>> E.J.A. van Beek > >>>> ICT Manager > >>>> IC&S > >>>> T: +31 30 2322878 > >>>> F: +31 30 2322305 > >>>> > >>>> PGP-key: > >>>> www.ic-s.nl/keys/eelco.txt > >>>> > >>>> _______________________________________________ > >>>> Dbmail mailing list > >>>> Dbmail@dbmail.org > >>>> https://mailman.fastxs.nl/mailman/listinfo/dbmail > >>>> > >>> -- End Original Message -- > >>> > >>> > >>> -- > >>> Jesse Norell > >>> [EMAIL PROTECTED] > >>> <dbmail-autoconf_update+md5+pbsp+unique_id.patch> > >> > >> _________________________ > >> R.A. Rozendaal > >> ICT Manager > >> IC&S > >> T: +31 30 2322878 > >> F: +31 30 2322305 > >> www.ic-s.nl > >> > >> _______________________________________________ > >> Dbmail mailing list > >> Dbmail@dbmail.org > >> https://mailman.fastxs.nl/mailman/listinfo/dbmail > >> > > -- End Original Message -- > > > > > > -- > > Jesse Norell > > jesse (at) kci.net > > _______________________________________________ > > Dbmail mailing list > > Dbmail@dbmail.org > > https://mailman.fastxs.nl/mailman/listinfo/dbmail > > > > _________________________ > R.A. Rozendaal > ICT Manager > IC&S > T: +31 30 2322878 > F: +31 30 2322305 > www.ic-s.nl > > _______________________________________________ > Dbmail mailing list > Dbmail@dbmail.org > https://mailman.fastxs.nl/mailman/listinfo/dbmail > -- End Original Message -- -- Jesse Norell jesse (at) kci.net
