Unfortunately those logs don't exist in the crowbar admin node nor on
the controller node! : (
Daniel San Pedro
Systems Administrator
MCNA Dental Plans
dsanpe...@mcna.net
Office: (800) 494-6262 Ext. 203
------------------------
CONFIDENTIALITY NOTICE: This electronic mail may contain
information that is privileged, confidential, and/or
otherwise protected from disclosure to anyone other than its
intended recipient(s). Any dissemination or use of this
electronic mail or its contents by persons other than the
intended recipient(s) is strictly prohibited. If you have
received this communication in error, please notify the
sender immediately by reply e-mail so that we may correct
our internal records. Please then delete the original
message. Thank you.
On 10/3/13 2:45 PM, christopher_dearb...@dell.com wrote:
Hey Daniel,
Glad to hear you're past your Cinder issue!
Can you send along the log files from /var/log/quantum?
Thanks,
Chris
From: crowbar-bounces On Behalf Of Daniel San Pedro
Sent: Thursday, October 03, 2013 11:45 AM
To: Jakesch, Simon
Cc: crowbar; Jacob, Jacob
Subject: Re: [Crowbar] mesa-1.6 - cinder barclamp fails when applying proposal
Good news! I was able to successfully apply the cinder barclamp:
1) I reinstalled the hardware (deleted it, booted via PXE, reinstalled OS via
allocation)
2) I deactivated and deleted all the proposals
3) I performed the /opt/dell/bin/barclamp_install.rb cinder command
4) I recreated proposals and applied one at a time
5) Cinder installed fine according to the GUI (success message and light is
green)
I have run into another issue, however. Quantum now fails. I couldn't find a
suitable log file with the error message (and I'm not sure which would be the
right one), so I defer to you guys for guidance as to which log file I need to
be looking at so that I may send you the error.
Thanks once again.
Daniel San Pedro
Systems Administrator
MCNA Dental Plans
dsanpe...@mcna.net<mailto:dsanpe...@mcna.net>
Office: (800) 494-6262 Ext. 203
------------------------
CONFIDENTIALITY NOTICE: This electronic mail may contain information that is
privileged, confidential, and/or otherwise protected from disclosure to anyone
other than its intended recipient(s). Any dissemination or use of this
electronic mail or its contents by persons other than the intended recipient(s)
is strictly prohibited. If you have received this communication in error,
please notify the sender immediately by reply e-mail so that we may correct our
internal records. Please then delete the original message. Thank you.
On 10/2/13 3:12 PM, Daniel San Pedro wrote:
On the web-gui, the cinder barclamp is flashing red and there is message on the
top stating that it failed to apply the proposal. Perhaps I gave you the wrong
log file or I need to pull new ones?
Could you specify what are the correct log files to look at, please?
http://picpaste.com/Screen_Shot_2013-10-02_at_3.08.18_PM-aRCzg2t0.png
Thanks!
Daniel San Pedro
Systems Administrator
MCNA Dental Plans
dsanpe...@mcna.net<mailto:dsanpe...@mcna.net>
Office: (800) 494-6262 Ext. 203
------------------------
CONFIDENTIALITY NOTICE: This electronic mail may contain information that is
privileged, confidential, and/or otherwise protected from disclosure to anyone
other than its intended recipient(s). Any dissemination or use of this
electronic mail or its contents by persons other than the intended recipient(s)
is strictly prohibited. If you have received this communication in error,
please notify the sender immediately by reply e-mail so that we may correct our
internal records. Please then delete the original message. Thank you.
On 10/2/13 2:50 PM, simon_jake...@dell.com<mailto:simon_jake...@dell.com> wrote:
Daniel,
We've poured over your log output, and while there some errors related to list DB
connections, all of those are eventually cleaned up. Towards the end everything seems to
be operating as expected. I'd like to understand what doesn't work when you say "It
failed again." Would you be able to give us more detail one what makes you say this
please?
Simon
From: Daniel San Pedro [mailto:dsanpe...@mcna.net]
Sent: Tuesday, October 01, 2013 4:17 PM
To: Jakesch, Simon
Cc: Jacob, Jacob; crowbar
Subject: Re: [Crowbar] mesa-1.6 - cinder barclamp fails when applying proposal
It failed again. Perhaps I am missing a step or I'm doing them out of order.
This is what I did:
on Controller Node:
1. bluepill chef-client stop
2. mysql -u root -p
3. drop database cinder;
4. drop user cinder@'%';
5. rm /etc/cinder/cinder.conf
Then, on Crowbar admin node:
1. /opt/dell/bin/barclamp_install.rb cinder (it succeeds)
Back on the Controller Node:
1. bluepill chef-client start
On the crowbar web gui:
1. I deactivated the cinder proposal then deleted it
2. created a new proposal
3. and then applied it.
Syslog for the Controller node attached. Let me know if you need another log
file.
Daniel San Pedro
Systems Administrator
MCNA Dental Plans
dsanpe...@mcna.net<mailto:dsanpe...@mcna.net>
Office: (800) 494-6262 Ext. 203
------------------------
CONFIDENTIALITY NOTICE: This electronic mail may contain information that is
privileged, confidential, and/or otherwise protected from disclosure to anyone
other than its intended recipient(s). Any dissemination or use of this
electronic mail or its contents by persons other than the intended recipient(s)
is strictly prohibited. If you have received this communication in error,
please notify the sender immediately by reply e-mail so that we may correct our
internal records. Please then delete the original message. Thank you.
On 10/1/13 4:45 PM, simon_jake...@dell.com<mailto:simon_jake...@dell.com> wrote:
My mistake it's actually barclamp_install.rb.
From: Daniel San Pedro [mailto:dsanpe...@mcna.net]
Sent: Tuesday, October 01, 2013 3:40 PM
To: Jakesch, Simon
Cc: Jacob, Jacob; crowbar
Subject: Re: [Crowbar] mesa-1.6 - cinder barclamp fails when applying proposal
I can not locate /opt/dell/bin/install_barclamp.rb on the crowbar admin node
nor on allocated node..
Daniel San Pedro
Systems Administrator
MCNA Dental Plans
dsanpe...@mcna.net<mailto:dsanpe...@mcna.net>
Office: (800) 494-6262 Ext. 203
------------------------
CONFIDENTIALITY NOTICE: This electronic mail may contain information that is
privileged, confidential, and/or otherwise protected from disclosure to anyone
other than its intended recipient(s). Any dissemination or use of this
electronic mail or its contents by persons other than the intended recipient(s)
is strictly prohibited. If you have received this communication in error,
please notify the sender immediately by reply e-mail so that we may correct our
internal records. Please then delete the original message. Thank you.
On 10/1/13 4:37 PM, Daniel San Pedro wrote:
Thanks. I did not modify anything when deploying the cinder barclamp. It fails
on the first try. Path:
Install crowbar OS.
Install Crowbar.
PXE boot two nodes: Controller and Compute
Rename and allocate nodes, wait for green light
Create proposals for each OpenStack barclamp except Swift and Tempest
Apply each proposal in order starting with the database barclamp to Controller
node
Apply the cinder barclamp to controller node - failure
My test environment is as follows:
KVM Host
Crowbar admin node running as KVM guest
Two KVM guests PXE booting off the Crowbar admin node
One private virtual network that all guests can talk to each other on
One public network that the crowbar node has where I can access the GUI from
I received instructions from another Dell CloudEdge team member on making this
work by editing the bc-template-network.json file before installing crowbar,
and it works well.
I am currently running through the steps you outlined below and will report
back my findings. Thanks once again.
Daniel San Pedro
Systems Administrator
MCNA Dental Plans
dsanpe...@mcna.net<mailto:dsanpe...@mcna.net>
Office: (800) 494-6262 Ext. 203
------------------------
CONFIDENTIALITY NOTICE: This electronic mail may contain information that is
privileged, confidential, and/or otherwise protected from disclosure to anyone
other than its intended recipient(s). Any dissemination or use of this
electronic mail or its contents by persons other than the intended recipient(s)
is strictly prohibited. If you have received this communication in error,
please notify the sender immediately by reply e-mail so that we may correct our
internal records. Please then delete the original message. Thank you.
On 10/1/13 2:36 PM, simon_jake...@dell.com<mailto:simon_jake...@dell.com> wrote:
Daniel,
we've taken a look at your issue, and we're having a hard time coming up with a
path on how you got to where you are now. Specifically your second statement
about being able to login with the cinder.conf password. None the less here are
the things you can do to either fix this issues or provide more information to
use:
We can try to recreate the cinder DB and reinitialize the password. In order to
do so we recommend you stop chef-client from running on whichever node you have
the DB located (which is typically the node that runs all the other MySQL DBs).
Then you should drop the DB via the usual mysqladmin command. After we upload
the whole Barclamp, this will reset all the associated Databags on the chef
server, which is exactly what you want. You do this via:
/opt/dell/bin/install_barclamp.rb cinder. For good measure delete the
cinder.conf and restart chef-client. The DB and cinder.conf should be recreated
with a new password at this time.
If the above method doesn't result in a success, please send us the logfile
contents (including +-100 lines) before and after the relevant section. We'll
be happy to take a closer look at things.
Hope this helps,
Simon
From: crowbar-bounces On Behalf Of Jacob, Jacob
Sent: Monday, September 30, 2013 4:36 PM
To: dsanpe...@mcna.net<mailto:dsanpe...@mcna.net>
Cc: crowbar
Subject: Re: [Crowbar] mesa-1.6 - cinder barclamp fails when applying proposal
Dell - Internal Use - Confidential
Hi Daniel,
Looks like after you changed cinder.conf , the changes get reverted back to
the wrong one when you re-applied the proposal.
Let me try to reproduce this here. Will keep you posted.
Thanks
Jacob M. Jacob
Software Dev Principal Engineer
Dell | Enterprise Cloud Solutions
From: crowbar-bounces On Behalf Of Daniel San Pedro
Sent: Monday, September 30, 2013 3:17 PM
To: crowbar
Subject: [Crowbar] mesa-1.6 - cinder barclamp fails when applying proposal
Hello,
I am running mesa-1.6_openstack-os-build.3459.dev. I am currently testing
crowbar to use on our production environment. I am able to successfully apply
the database, keystone, rabbitmq, and glance barclamps, but get hung up when
applying cinder. I get the following error message in the logs and the proposal
fails:
CRITICAL [cinder] (OperationalError) (1045, "Access denied for user
'cinder'@'192.168.124.81' (using password: YES)")
Upon further research, I found that the MySQL password that the barclamp
reports differs from what is cinder.conf
I have tried all of the below with no success:
* Synchronize passwords. I tried changing cinder.conf to the password found
in the barclamp and reapplied, and vice versa
* I am able to login locally to MySQL using the cinder user and the
password found in cinder.conf
* Edit /opt/dell/barclamps/cinder/chef/data_bags/crowbar/bc-template-cinder.json and
manually add the password in the "db" section
Thanks!
--
Daniel San Pedro
Systems Administrator
MCNA Dental Plans
dsanpe...@mcna.net<mailto:dsanpe...@mcna.net>
Office: (800) 494-6262 Ext. 203
------------------------
CONFIDENTIALITY NOTICE: This electronic mail may contain information that is
privileged, confidential, and/or otherwise protected from disclosure to anyone
other than its intended recipient(s). Any dissemination or use of this
electronic mail or its contents by persons other than the intended recipient(s)
is strictly prohibited. If you have received this communication in error,
please notify the sender immediately by reply e-mail so that we may correct our
internal records. Please then delete the original message. Thank you.
_______________________________________________
Crowbar mailing list
Crowbar@dell.com
https://lists.us.dell.com/mailman/listinfo/crowbar
For more information: http://crowbar.github.com/
