Thanks for the suggestion I will try that.
If you can point me to your fixes I can try them in harcuvar and let you know.
Thanks,
Tirumalesh
On Fri, Feb 5, 2021 at 1:43 AM, Julien Viard de Galbert <coreboot...@vdg.name>
wrote:
> Hi,
>
> You should probably try an older version of coreboot, close to when the
> harcuvar board was introduced and check if that version outputs anything
> on UART.
> I did that on a custom board using denverton recently and already
> proposed a few fix, but I don't have an harcuvar board to test.
>
> Hope this helps,
>
> Julien
> On Tue, Feb 02, 2021 at 08:27:03AM +0000, Tirumalesh wrote:
>> Hi,
>>
>> I also tried
>>
>> - config_intel_harcuvar config
>> - Built complete image with Intel flash image tool
>>
>> Still not able to see anything on UART. Please some one help with some
>> pointers here.
>>
>> Thanks,
>> Tirumalesh.
>> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
>> On Monday, February 1, 2021 12:02 PM, Tirumalesh via coreboot
>> <coreboot@coreboot.org> wrote:
>>
>> > Hi,
>> >
>> > I am trying to boot Coreboot on Intel Harcuvar CRB.
>> >
>> > The steps I tried
>> > -> make menuconfig
>> > selected Intel->Harcuvar
>> > ->make (got coreboot.rom 16MB)
>> >
>> > -> split –b 8M –a 1 –d coreboot.rom coreboot
>> > with dediprog programmed last 8M with coreboot1 (file generated with Split)
>> >
>> > Not able to see any output on UART. please let me know if Sam missing any
>> > configs/steps here.
>> > Any help is greatly appreciated.
>> >
>> > Thanks,
>> > Tirumalesh.
>
>> _______________________________________________
>> coreboot mailing list -- coreboot@coreboot.org
>> To unsubscribe send an email to coreboot-le...@coreboot.org
> _______________________________________________
> coreboot mailing list -- coreboot@coreboot.org
> To unsubscribe send an email to coreboot-le...@coreboot.org
_______________________________________________
coreboot mailing list -- coreboot@coreboot.org
To unsubscribe send an email to coreboot-le...@coreboot.org
