Hi, You should probably try an older version of coreboot, close to when the harcuvar board was introduced and check if that version outputs anything on UART. I did that on a custom board using denverton recently and already proposed a few fix, but I don't have an harcuvar board to test.
Hope this helps, Julien On Tue, Feb 02, 2021 at 08:27:03AM +0000, Tirumalesh wrote: > Hi, > > I also tried > > - config_intel_harcuvar config > - Built complete image with Intel flash image tool > > Still not able to see anything on UART. Please some one help with some > pointers here. > > Thanks, > Tirumalesh. > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Monday, February 1, 2021 12:02 PM, Tirumalesh via coreboot > <coreboot@coreboot.org> wrote: > > > Hi, > > > > I am trying to boot Coreboot on Intel Harcuvar CRB. > > > > The steps I tried > > -> make menuconfig > > selected Intel->Harcuvar > > ->make (got coreboot.rom 16MB) > > > > -> split –b 8M –a 1 –d coreboot.rom coreboot > > with dediprog programmed last 8M with coreboot1 (file generated with Split) > > > > Not able to see any output on UART. please let me know if Sam missing any > > configs/steps here. > > Any help is greatly appreciated. > > > > Thanks, > > Tirumalesh. > _______________________________________________ > coreboot mailing list -- coreboot@coreboot.org > To unsubscribe send an email to coreboot-le...@coreboot.org _______________________________________________ coreboot mailing list -- coreboot@coreboot.org To unsubscribe send an email to coreboot-le...@coreboot.org
