when you choose a new resolution, windows always allow an automatic return to the previous one, unless approved by the user to be good, so next times when you change a resolution, unless you click on 'YES' within 15 seconds it will be back to original, this way you can try and test all the resolutions safely
On Oct 25, 3:40 pm, DigitalBlade <[EMAIL PROTECTED]> wrote: > Make sure you install the driver CD for the monitor, it contains a > file that tells Windows what's the maximum resolution of your screen. > It's probably 1680x1050. By default, Windows XP doesn't show > widescreen resolutions, you probably chose 1600x1200 which is full > screen and is out of range, thus a blank screen. > > On Oct 22, 3:37 pm, Bill <[EMAIL PROTECTED]> wrote: > > > > > Operating System: Windows XP Home Edition + SP3 > > CPU: AMD Athlon 64 3000+ 2.01GHz > > Memory:1GB > > > Hello Big Matt, > > Somehow I was able to log on as no password was needed but as you can > > see from the photos there is no way I could change the screen > > resolution by r/clicking on the Desktop. So I booted into Safe Mode > > but the screen resolution was already set to it's lowest setting of > > 800 x 600 so that didn't help. I then booted into VGA Mode. When the > > Desktop appeared a pop-up stated that the screen resolution was low > > and asked if I wanted it automatically reset and I clicked yes. But > > the problem persisted when I logged on in normal mode. I again booted > > into safe mode and tried to uninstall the display adapter drivers by r/ > > clicking on Desktop and selecting Properties - Settings tab – Advanced > > button – Monitor tab – Properties button – Driver tab, but that did > > not work. I then tried r/clicking on My Computer in the Start Menu > > selecting Properties – Hardware – Device Manager and opening Display > > adapter box. Here I was able to uninstall the driver. Upon reboot a > > dialog box appeared stating that new hardware had been found and would > > I insert a CD for the driver, which I did. My new monitor is working > > fine now although at a lower than optimal resolution. I will > > eventually get a better graphics card or a new PC. > > > Operating System: Windows XP Home Edition + SP3 > > CPU: AMD Athlon 64 3000+ 2.01GHz > > Memory:1GB > > > Thanks anyway. > > > Bill. > > > On Oct 22, 1:10 pm, BigMatt <[EMAIL PROTECTED]> wrote: > > > > Right click the desktop, hit the settings tab, when in the settingsd > > > tab, there is a slider at the bottom, after you slide it, hit > > > 'Apply' , test the resolutions to find the best one for ya... > > > > Your graphics card doesn't support the maximum resolution for that > > > monitor, thats the only issue. I run a dual monitor set up with them > > > at 1280 by 1024, I have a pretty high end graphics card though. > > > Another thing about the desktop tiling like that, while in the > > > 'desktop' tab, click 'stretch'' next to the picture on you desktop, > > > should solve that one. > > > > I like to brag about my monitors... Sorry guys... > > > > On Oct 21, 9:35 am, bow.bill <[EMAIL PROTECTED]> wrote: > > > > > Hello People, > > > > > I've just tried to install a new 22" TFT monitor. After connecting the > > > > plugs I switched the computer on and a pop-up appeared informing me > > > > that the resolution needed to be changed to 1600x???? I could not > > > > change the settings to those suggested so I chose roughly similar > > > > values. Now I can't read a thing on my desktop. My monitor screen now > > > > shows about 6 desktop pictures from left to right covering the top > > > > quarter of the screen, the rest of the screen being black. I am unable > > > > to read anything. I probably need a better graphics card or better > > > > still a new computer but for now I would just like to be able to use > > > > the computer in a low resolution setting. How can I change the monitor > > > > resolution back to 800 x 600 or something similar? > > > > > Thanks. > > > > > Bill.- Hide quoted text - > > > > - Show quoted text -- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Computer Tech Support" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/computer-tech-support?hl=en -~----------~----~----~----~------~----~------~--~---
