abh1sar commented on code in PR #9208: URL: https://github.com/apache/cloudstack/pull/9208#discussion_r1706471038
########## plugins/storage/fileshare/storagefsvm/src/main/resources/conf/fsvm-init.yml: ########## @@ -0,0 +1,196 @@ +#cloud-config +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. + +--- +write_files: + - path: /usr/local/bin/add-partition + permissions: '0700' + owner: root:root + content: | + #!/bin/bash -e + + LOG_FILE="/var/log/userdata.log" + log() { + echo "$(date '+%Y-%m-%d %H:%M:%S') - $1" >> $LOG_FILE + } + + log "Running add script" + + # Variables + PARTITION="$1" + MOUNT_POINT="/mnt/fs" + EXPORT_DIR="$MOUNT_POINT/share" + PERMISSIONS="rw,sync,no_subtree_check" + + mkdir -p "$MOUNT_POINT" + + FS_TYPE=$(lsblk -no FSTYPE "$PARTITION") + + if [ -z "$FS_TYPE" ]; then + FILESYSTEM={{ fsvm.filesystem }} + if [ "$FILESYSTEM" == "xfs" ]; then + mkfs.xfs "$PARTITION" + log "Formatted Partition $PARTITION with XFS Filesystem." + elif [ "$FILESYSTEM" == "ext4" ]; then + mkfs.ext4 "$PARTITION" + log "Formatted Partition $PARTITION with EXT4 Filesystem." + else + log "Invalid filesystem type specified. Use 'xfs' or 'ext4'." + exit 1 + fi + else + log "Partition $PARTITION already has a filesystem of type $FS_TYPE. Skipping format." + fi + + FS_INFO=$(blkid "$PARTITION") + UUID=$(echo "$FS_INFO" | grep -oP "UUID=\"\K[^\"]+") + TYPE=$(echo "$FS_INFO" | grep -oP "TYPE=\"\K[^\"]+") + + if [ -z "$UUID" ] || [ -z "$TYPE" ]; then + log "Failed to retrieve UUID or TYPE for $PARTITION" + exit 1 + fi + + echo "UUID=$UUID $MOUNT_POINT $TYPE defaults 0 2" >> /etc/fstab + log "Added fstab entry." + + mount -a + + if mountpoint -q "$MOUNT_POINT"; then + log "$PARTITION is successfully mounted on $MOUNT_POINT" + else + log "Failed to mount $PARTITION on $MOUNT_POINT" + exit 1 + fi + + if [ ! -d "$EXPORT_DIR" ]; then + log "Creating export directory..." + mkdir -p "$EXPORT_DIR" + chown nobody:nogroup "$EXPORT_DIR" + chmod 777 "$EXPORT_DIR" + fi + + log "Configuring NFS export..." + EXPORT_ENTRY="$EXPORT_DIR *($PERMISSIONS)" + if ! grep -qF "$EXPORT_ENTRY" /etc/exports; then + echo "$EXPORT_ENTRY" | tee -a /etc/exports > /dev/null + fi + exportfs -ra + + log "Enable and restart NFS server..." + systemctl enable nfs-kernel-server + systemctl restart nfs-kernel-server + + log "NFS share created successfully." + log "Finished running add script." + + - path: /usr/local/bin/resize-partition + permissions: '0700' + owner: root:root + content: | + #!/bin/bash -e + + LOG_FILE="/var/log/userdata.log" + log() { + echo "$(date '+%Y-%m-%d %H:%M:%S') - $1" >> $LOG_FILE + } + log "Running resize script." + PARTITION="$1" + + FILESYSTEM={{ fsvm.filesystem }} + if [ "$FILESYSTEM" == "xfs" ]; then + xfs_growfs "$PARTITION" + elif [ "$FILESYSTEM" == "ext4" ]; then + resize2fs "$PARTITION" + else + log "Invalid filesystem type specified. Use 'xfs' or 'ext4'." + exit 1 + fi + + log "Finished running resize script." + + - path: /etc/systemd/system/cloud-dhclient@.service + permissions: '0700' + owner: root:root + content: | + [Unit] + Description=CloudStack service to start dhclient + + [Install] + WantedBy=multi-user.target + + [Service] + Type=simple + ExecStart=/usr/sbin/dhclient %I + Restart=on-failure + + - path: /usr/local/bin/fsvm-setup + permissions: '0700' + owner: root:root + content: | + #!/bin/bash -e + + LOG_FILE="/var/log/userdata.log" + log() { + echo "$(date '+%Y-%m-%d %H:%M:%S') - $1" >> $LOG_FILE + } + + HYPERVISOR_INFO=$(dmesg | grep -i hypervisor) + if echo "$HYPERVISOR_INFO" | grep -i "kvm"; then + BLOCK_DEVICE="vdb" + elif echo "$HYPERVISOR_INFO" | grep -i "xen"; then + BLOCK_DEVICE="xvdb" + elif echo "$HYPERVISOR_INFO" | grep -i "vmware"; then + BLOCK_DEVICE="sdb" + else + log "Unknown hypervisor" + exit 1 + fi + + PARTITION="/dev/$BLOCK_DEVICE" + ADD_PARTITION_FILE="/usr/local/bin/add-partition" + RESIZE_PARTITION_FILE="/usr/local/bin/resize-partition" + + UDEV_ADD_RULE='KERNEL=="$BLOCK_DEVICE", ACTION=="add", SUBSYSTEM=="block", RUN+="$ADD_PARTITION_FILE /dev/%k"' + UDEV_RESIZE_RULE='KERNEL=="$BLOCK_DEVICE", ACTION=="change", SUBSYSTEM=="block", RUN+="$RESIZE_PARTITION_FILE /dev/%k"' + UDEV_ADD_NIC_RULE='ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ENV{SYSTEMD_WANTS}="cloud-dhclient@%k.service"' + + # Add udev rules + echo "$UDEV_RESIZE_RULE" > /etc/udev/rules.d/99-resize-partition.rules + + echo "$UDEV_ADD_NIC_RULE" > /etc/udev/rules.d/99-add-nic.rules + + if [ ! -b "$PARTITION" ]; then + log "Partition $PARTITION does not exist. Adding udev rule for adding the partition" + echo "$UDEV_ADD_RULE" > /etc/udev/rules.d/99-add-partition.rules + else + log "Partition $PARTITION already exists. Running the $ADD_PARTITION_FILE script" + $ADD_PARTITION_FILE "$PARTITION" + fi + + log "Udev rules added." + + # Reload udev rules + udevadm control --reload-rules + udevadm trigger + + log "Script execution finished successfully." + +runcmd: + - echo "test" > test Review Comment: This was just for debugging. have removed it. You're right we should add a msg to /root/success or /home/cloud/success similar to cks at the end of fsvm-setup -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: commits-unsubscr...@cloudstack.apache.org For queries about this service, please contact Infrastructure at: us...@infra.apache.org
