Make sure you have fuel flow. Is the electric fuel pump working? Is the fuel turned off? Check for fuel at the injector, crack a line and crank the engine. You should have fuel flow.
Douglas Mountjoy 1988 LF 39 Mexico at large 1984 Sabre 34 Port Orchard, WA On Fri, May 17, 2024, 19:19 Todd Williams via CnC-List < cnc-list@cnc-list.com> wrote: > Looking for some input on my non starting Universal / Westerbeke diesel > 5416 on my 1980 C& C 34. It was running great at the end of last year but > no go from the start this year. > > It turns over great but no sounds of combustion. Battery is brand new. > Oil and transmission fluids are at proper levels and fresh. It sounds like > the glow plugs are working because the blower changes pitch with the > increased current draw. Fuel looks good, checked pickup for debris, changed > fuel filter, bled lines. I did have some electrical work done at the wiring > harness but I don’t think that would affect it. > > I am thinking either I need to look at the injectors and injector pump or > I need to do a compression test. I’ve read about both in online forums but > haven’t had the “opportunity” to dig this far into engine troubles. Any > input from the group on other diagnostic tests or possible sources of the > issue? Thanks in advance. > > TODD > Indigo Out We Go > 1980 C&C 34 > Saco, ME > Please show your appreciation for this list and the Photo Album site and > help me pay the associated bills. Make a contribution at: > https://www.paypal.me/stumurray > Thanks for your help. > Stu
Please show your appreciation for this list and the Photo Album site and help me pay the associated bills. Make a contribution at: https://www.paypal.me/stumurray Thanks for your help. Stu
