Mine the controls got put on the steering On Wed, Sep 28, 2022 at 12:14 PM Dr. Mark Bodnar via CnC-List < cnc-list@cnc-list.com> wrote:
> > Mine has the same catch point. Not certain the purpose - but I had to > remove the cables and replace when I re-powered. Working with the > throttle/shifter was challenging - but that catch/notch mechanism was built > into the throttle. Still have same feeling with new engine. > > Mark > > ----------------------------------------- > Dr. Mark Bodnar, BSc, DC, FCCPOR(C) > Chiropractic Rehabilitation Specialist > Bedford Chiropractic www.BedfordChiro.ca > ----------------------------------------- > > There is no cure for birth and death save to enjoy the interval. > - George Santayana > > On 2022-09-25 2:41 p.m., Leeward Rail via CnC-List wrote: > > Our 30 mk1 with engine controls on the cockpit side, has a throttle > detent/notch you can feel as you push it forward. > > Anyone else have this? > If so, what is the purpose? > > The cable is out of adjustment. I am going to adjust the cable and wonder > if that detent is to meant to be "startup" position or what. > > I would assume if it is meant to be a start position that there is a > recommended carb linkage position to match that detent at the throttle lever > > Cheers! > Roy > > -- Joel Delamirande *www.jdroofing.ca <http://www.jdroofing.ca>*
