Thanks everyone! I should be able to work with this information. Going to make some calls today and check out the USCG website to see if I can either update my registration to show RI build or to prove the boat was imported into the US as "Rainbow" - which it was because I have some paperwork onboard showing the boat was called that once.
Dan Cormier C&C44 Breakaweigh Halifax, NS / Florida On Mon, Jun 27, 2022, 12:03 AM Fred Hazzard via CnC-List < cnc-list@cnc-list.com> wrote: > The aluminum plate in the cockpit of my 44 shows it was built in Rhode > Island. > It is the 7th one built. > The HIN was removed when painted. > > Fred Hazzard > S/V Fury > > > Sent from my iPhone > > On Jun 26, 2022, at 6:19 PM, Don Kern via CnC-List <cnc-list@cnc-list.com> > wrote: > > > > Dan, > > Your boat was registered in the US as *Rainbow *with a USCG registration > number of 1024202. on Dec 1994 thru Dec 2001. > > Interesting that there is another C&C 44 that has HIN that indicates it is > also Hull #1 (HIN ZCC44001D485).* Indigo*, a Canadian vessel was in US > waters (Southwest Harbor, ME) in June 2019. > Don Kern > *Fireball*, C&C35 Mk-2 > Bristol, RI > > > On 6/25/2022 7:22 PM, Dan via CnC-List wrote: > > Hi Don, > > It was me who started this converstaion on looking up the manufacturing > location. > Trying to find out if my 1986 C&C44 was made in Canada or the US. > My hull number is: > ZCC44001H586 > > When I look it up online it tells me the boat was made in Aug. 1985 but > not where it was made. > > Thanks so much! > Dan > > On Sat, Jun 25, 2022, 2:14 PM Don Kern via CnC-List <cnc-list@cnc-list.com> > wrote: > >> Ron, >> >> I have been collecting data on the C&C for quite a few years and have run >> into the problem of what Portsmouth RI actually built due to the apparent >> use of both ZCC and CCY for Hull No. The 38s are one of the problems with >> the Landfalls and Mk-2s. I originally was under the impression that the LF >> 38s were built in Portsmouth, RI with HIN ZCC and Mk-2s only in Canada (HIN >> - CCY), but have run into exceptions. >> >> Can you you provide me with a full hull number and where your C&C 38 Mk-2 >> was built? >> Don Kern >> Fireball, C&C35 Mk-2 >> Bristol, RI >> >> >> On 6/25/2022 12:18 PM, RON CASCIATO via CnC-List wrote: >> >> Hi Dan, not sure if this helps but......some time ago after the factory >> closed, South Shore Yachts in Toronto collected most of the boat files >> including something called a "build file". >> This file was specific to a single boat and was filed by the hull number. >> They made these files available to owners for $35-50. >> I have the one for my 38MKIIC and it is about 50 sheets long and details >> the build including drawings and, in my case, a 2 year later rework of the >> floor because of "flexing"????? >> I think Rob Maclachlan finally transferred the remaining documents to the >> Marine Museum (I'm not sure of the exact name, but I do know that some >> listers have had positive corresoondence with them). >> Hopefully, someone here can fill in the missing info to contact them. >> Good luck >> Ron C. >> Impromptu >> C&C 38MKII, #125, '77 >> >> On Jun 25, 2022 6:47 AM, Dan via CnC-List <cnc-list@cnc-list.com> >> <cnc-list@cnc-list.com> wrote: >> >> Hi all, >> Just sending a call out to only C&C44 owners who may have any records >> showing if their boats were built in Ontario or at the factory in >> Rhode Island? Any kind of builders plaque, builders certificate, an >> original receipt or even contact info for someone who has archives from >> when the factories closed down? (I know that's a long shot) >> >> Thanks so much! >> >> Dan Cormier >> C&C44 Breakaweigh >> Halifax NS / Florida >> >> >> >>
