Congratulations juliano on your boat That doesn’t look to bad If you think your boat is too small I might have a 30 foot for you
On Thu, Jan 21, 2021 at 10:35 PM CHARLES SCHEAFFER via CnC-List < cnc-list@cnc-list.com> wrote: > Congrats on the boat. Where are you located? > > That's the smile mentioned. The broken teeth is just filler or fairing > material that broke off. I've seen much worse. > > You can use an angle grinder with an 80 grit flap disc (40 grit if you > have skills) to gently remove the high spots and loose stuff and expose the > joint. Be careful as the more material you remove, the more you have to > fill/fair. Fill the actual joint with *GFlex* or *Thixo Flex* from > Jamestown Distributers and smooth with a flexible spreader, then after it > cures, sand the area, wipe the dust off with Acetone or Zylene and fair > with *Total Fair* from Jamestowndistributers. It's an easy to mix and > easy to sand, waterproof, compound. > > There are many videos on YouTube showing how. > > Chuck Scheaffer, Resolute 1989 34R, Pasadena Md > > > > > On 01/21/2021 9:47 PM Juliano Franz via CnC-List <cnc-list@cnc-list.com> > wrote: > > > Hi all, > My first time messaging the list. > > A couple of months ago I came by a C&C 25 that was neglected (aka > abandoned) for a couple of years on the hard. I am new to boat onwing and > have been learning a lot on how to get her ready following Casey's "This > old boat" and some youtube channels. > > There is a crack (?) on the keel hull joint that I am not sure how to > tackle. It is not really a smile, maybe some broken teeth? =] Here is a > photo of it (damage is the same on both sides) https://bit.ly/3p9EsRT > Going over the variety of "smile repairs" there is one that seems like a > good option for me: G/Flex, sand, bottom paint. Can anyone share their > wisdom with me on this idea? > > Thanks all! > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - > Stu > > Thanks to all of the subscribers that contributed to the list to help with > the costs involved. If you want to show your support to the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray Thanks > - Stu -- Joel Delamirande *www.jdroofing.ca <http://www.jdroofing.ca>*
Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Thanks - Stu
