That reminds me...on our 40-2 had to remove helm "throne" hump too. But of a PIA in a sea state, but doable.
Sent from my Android. Please forgive typos. Thank you. ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Charlie Nelson via CnC-List <cnc-list@cnc-list.com> Sent: Friday, March 20, 2020 11:52:40 AM To: cnc-list@cnc-list.com <cnc-list@cnc-list.com> Cc: cenel...@aol.com <cenel...@aol.com> Subject: Re: Stus-List Emergency tiller My emergency tiller could not reach the hole in the top of the rudder since the stern step with the removable plate (to access the rudder post) was offset enough that the tiller could not reach the rudder post--finding that out when needed would be a REAL EMERGENCY! I had the marina redo the tiller to fit--no big deal for someone who know how to weld SS pipe--and not too costly. It was made just short enough to miss the wheel/pedestal--however, the lever arm is thus pretty short. I wouldn't want to steer for long with my short tiller on my long (36 ft) boat! Charlie Nelson Water Phantom 1995 C&C 36 XL/kcb -----Original Message----- From: Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> To: 'cnc-list@cnc-list.com' <cnc-list@cnc-list.com> Cc: Hoyt, Mike <mike.h...@impgroup.com> Sent: Fri, Mar 20, 2020 10:42 am Subject: Re: Stus-List Emergency tiller Will The emergency tiller on Persistence runs at an angle from the rudder post (something between 30 and 45 degrees I think). The pedestal is NOT in the way but the wheel is. Mike Persistence Halifax, NS -----Original Message----- From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> On Behalf Of Will Gerstmyer via CnC-List Sent: March 20, 2020 11:08 AM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Will Gerstmyer <wgerstm...@gmail.com<mailto:wgerstm...@gmail.com>> Subject: Stus-List Emergency tiller Hi, I am impressed with the birth of the emergency tiller. However, it would appear that I’d have to remove the wheel pedestal to have room for it to work. If so, does anybody have any experience doing that?? I’m also thinking 1986–this sucker is likely to be very challenging to unbolt! Thanks, Will 1986 C&C 41 Costume Change Portland ME Will Gerstmyer 978-609-1331 _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
