My Cold Machine had electrical problems two years ago. I called in a pro and had it repaired for around $250. That got me through the season. Last year the system ran low on pressure. I found some illegal refrigerant and got it up and running. Toward the end of last year the leak got worse. At that point I decided to bite the bullet and replace everything. It was becoming a constant maintenance problem and the illegal refrigerant issue was not working for me.
From: Robert Gallagher via CnC-List Sent: Sunday, September 29, 2019 6:11 PM To: cnc-list@cnc-list.com Cc: Robert Gallagher Subject: Stus-List Refridgeration I have what appears to be an original circa 1999 Cold Machine. The compressor runs and cycles off for very short periods. Sometimes the temperature is perfect at 34-38 for days on end, then then other times it will stay in the high 40's - low 50's. Shutting it off and letting it sit for a few hours seems to help but this could be anecdotal. Two questions before I call in a pro. Has anyone have advice for self repair? Is it worth calling in a pro with a unit this old, or should I just remove and replace? Thanks in advance, Rob -------------------------------------------------------------------------------- _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
