Neil, You may well have an "oopstang" and just never noticed it. The deck plate should be on the starboard side deck near the shrouds. I'll try to get pictures later in the week.
Dennis C. On Mon, Jul 22, 2019 at 5:11 PM Neil Gallagher via CnC-List < cnc-list@cnc-list.com> wrote: > Dennis, > > You have me interested, as I don't think my 35-1 has any type of brackets, > and the bulkhead does squeak in any significant seaway. I'd be quite > interested in pictures. (I was told by a former 35-1 owner the solution > was beeswax on the bulkhead.) > > Neil Gallagher > Weatherly, 35-1 > Glen Cove, NY > > On 7/22/2019 4:42 PM, Dennis C. via CnC-List wrote: > > OK, I'm taking a flyer here because I'm not familiar with the 33-2. Does > it have an "oopstang"? That's the name a long missing lister (Wally) gave > to a bracket assembly which holds the bulkhead to the deck. Look for a > beveled metal piece on the deck which measures about 1" x 2" with a slotted > flat head fastener. The fastener holds an L-shaped bracket which resembles > a chain plate which is attached to the bulkhead. > > If your boat has one, try tightening the fasteners for this assembly. > > On my 35-1, the top of the bulkhead is held by this assembly. To the best > of my knowledge, the top of the bulkhead floats except for this bracket. > So it may be creaking just with a small movement. > > Advise us what you find. I plan to be on Touche' later this week, I'll > look more closely at it and try to grab some pictures. > > Dennis C. > Touche' 35-1 #83 > Mandeville, LA > > On Mon, Jul 22, 2019 at 2:52 PM Andrew Walther via CnC-List < > cnc-list@cnc-list.com> wrote: > >> Hi there, >> >> >> >> Does anybody have any suggestions / comments on a rather significant >> creaking near starboard bulkhead on C&C33 Mark II? The boat is overall in >> very good shape but I did notice creaking when walking on the deck slightly >> forward of the bulkhead whilst at dock. We were out in heavy seas (25 >> knots) on our last trip reaching through waves and the creaking was quite >> noticeable down below. There are no soft spots and from visual and audible >> inspections I don’t see any signs of delamination. Also no signs of water >> ingress. >> >> >> >> I’m thinking that the joint between the bulkhead and deck may have come >> loose and was wondering if anybody has experienced the same, and would be >> curious to hear any suggestions on how to remedy the issue. >> >> >> >> Thanks! >> >> >> >> Andy >> >> >> >> >> >> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each >> and every one is greatly appreciated. If you want to support the list - >> use PayPal to send contribution -- https://www.paypal.me/stumurray >> >> > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
