Dennis,

You have me interested, as I don't think my 35-1 has any type of brackets, and the bulkhead does squeak in any significant seaway. I'd be quite interested in pictures.  (I was told by a former 35-1 owner the solution was beeswax on the bulkhead.)

Neil Gallagher
Weatherly, 35-1
Glen Cove, NY

On 7/22/2019 4:42 PM, Dennis C. via CnC-List wrote:
OK, I'm taking a flyer here because I'm not familiar with the 33-2.  Does it have an "oopstang"?  That's the name a long missing lister (Wally) gave to a bracket assembly which holds the bulkhead to the deck.  Look for a beveled metal piece on the deck which measures about 1" x 2" with a slotted flat head fastener.  The fastener holds an L-shaped bracket which resembles a chain plate which is attached to the bulkhead.

If your boat has one, try tightening the fasteners for this assembly.

On my 35-1, the top of the bulkhead is held by this assembly.  To the best of my knowledge, the top of the bulkhead floats except for this bracket.  So it may be creaking just with a small movement.

Advise us what you find.  I plan to be on Touche' later this week, I'll look more closely at it and try to grab some pictures.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Mon, Jul 22, 2019 at 2:52 PM Andrew Walther via CnC-List <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote:

    Hi there,

    Does anybody have any suggestions / comments on a rather
    significant creaking near starboard bulkhead on C&C33 Mark II? 
    The boat is overall in very good shape but I did notice creaking
    when walking on the deck slightly forward of the bulkhead whilst
    at dock.  We were out in heavy seas (25 knots) on our last trip
    reaching through waves and the creaking was quite noticeable down
    below.  There are no soft spots and from visual and audible
    inspections I don’t see any signs of delamination. Also no signs
    of water ingress.

    I’m thinking that the joint between the bulkhead and deck may have
    come loose and was wondering if anybody has experienced the same,
    and would be curious to hear any suggestions on how to remedy the
    issue.

    Thanks!

    Andy

    _______________________________________________

    Thanks everyone for supporting this list with your contributions. 
    Each and every one is greatly appreciated. If you want to support
    the list - use PayPal to send contribution --
    https://www.paypal.me/stumurray



_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to