I would highly recommend you contact Fred STreet of this List; [email protected] Fred was able spec and procure everything needed to install an under deck Octopus autopilot for my 37; its tight, but it works....very nice to have Fred as a resource as well... he has patiently helped me even when I ask repeat questions! Richard sv Bushmark4: 1985 C&C 37 CB; Ohio River, Mile 596 Richard N. Bush 2950 Breckenridge Lane, Suite Nine Louisville, Kentucky 40220-1462 502-584-7255 -----Original Message----- From: James Bibb via CnC-List <[email protected]> To: Chuck S via CnC-List <[email protected]> Cc: James Bibb <[email protected]> Sent: Wed, May 29, 2019 11:31 am Subject: Stus-List Auto pilot advice 34-36R
I’ve given up on my Raymarine Ev-100 Tiller pilot. It the motor drive alway’s kicks out and it’s a year old. I’m assuming it’s under-powered for the size of boat I’m asking it to maneuver. My electronics are B&G Triton2’s….looking at the B&G pilot model so that I can utilize my chart plotter, etc. Any experience placing a ram underneath the stern rudder tube deck plate in these models? there’s a location for a pedestal for other models instead of a tiller. I hope to mount it underneath the deck plate but outside of the hull with a arm off of the rudder post below the tiller. I am considering a ram style for the movement. Thanks James Bibb C&C 34-36R Darwin’s Folly _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
