Hi James, My R model was originally built with a wheel and later the PO converted to a tiller. That's how she was when I got her and I installed the wheel the first summer. I use a Raymarine wheel pilot and it works very well. I had to replace the head after 12 years and the new model seems better. I bought the head with pilot and keep it as a spare while the old one still works fine.
I have seen underdeck rams installed on the plus models. One owner hired the boatyard to install the ram and they dropped the rudder and cut the fiberglass tube and installed an arm onto the SS shaft. Another owner with wheel steering installed his a ram so it attaches to the radial which lives under the deck filler. That sounds like your plan and I like that better. I'll try and find some pictures. Last thought: The best autopilots are used by the solo racers on Figaro II and Vendee Globe boats. Those guys drive their boats hard in high winds and big seas and the pilots they use have to steer for months to circle the globe. I would research that and see what brand they install. Good luck and keep us posted. Chuck, Resolute 1990 C&C 34/36R > On May 29, 2019 at 11:31 AM James Bibb via CnC-List <cnc-list@cnc-list.com > mailto:cnc-list@cnc-list.com > wrote: > > > I’ve given up on my Raymarine Ev-100 Tiller pilot. It the motor drive > alway’s kicks out and it’s a year old. I’m assuming it’s under-powered for > the size of boat I’m asking it to maneuver. My electronics are B&G > Triton2’s….looking at the B&G pilot model so that I can utilize my chart > plotter, etc. Any experience placing a ram underneath the stern rudder tube > deck plate in these models? there’s a location for a pedestal for other > models instead of a tiller. I hope to mount it underneath the deck plate but > outside of the hull with a arm off of the rudder post below the tiller. I am > considering a ram style for the movement. > > Thanks > > James Bibb > C&C 34-36R > Darwin’s Folly > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
