Our 35-2 has the vinyl coated lines (maybe original) which appear to be in decent shape (the vinyl that is). I thought of removing the vinyl, but it appears the wire beneath is quite thin (maybe 1/8" or 3/16") so would be more likely to cut into fingers. I was planning to just use my old shrouds for lifelines when I redo standing rigging...
On Mon, May 13, 2019 at 6:09 AM Paul Fountain via CnC-List < cnc-list@cnc-list.com> wrote: > Klacko in Oakville - send them your old ones and have them make new ones. > When we did ours we eliminated the covering (which is now the offshore > rule), which eliminated the rusting. > > -----Original Message----- > From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Dave via > CnC-List > Sent: May 12, 2019 8:10 PM > To: C&c Stus List <cnc-list@cnc-list.com> > Cc: syerd...@gmail.com > Subject: Stus-List Source for replacement lifelines in Toronto? > > Hi all - can anyone recommend a source for replacement lifelines for my > ‘85 33-2? > Original pvc covered ss wire looking a bit tired. Top lifeline passes > through a cast eye atop the stanchion, lower passes through (very tired) > nylon bushings set into holes in stanchions. Need bushings also. > > Thanks for any suggestions! > > Dave 33-2. > > Sent from my iPad > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Shawn Wright shawngwri...@gmail.com
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
