"keep it out of the pauls" (not panels)... Darned spell check on my tablet...
I like the idea of a box cut out to set over the top of the winches, but have
to admit I've never gone to that extreme, and have not (as of yet!) lost a
spring or pawl. That said, I can easily see how it would happen.
Bruce Whitmore
(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net
On Tuesday, April 23, 2019, 7:38:42 AM EDT, bwhitmore via CnC-List
<cnc-list@cnc-list.com> wrote:
For grease, Practical Sailor highly recommends any of the winch maker's
greases or Green Grease which is available at auto parts stores. I went with
the Green Grease. Remember, small amounts of grease, not big globs, and keep
it out of the panels, which should be lubed using a light machine oil. I found
one made by 3 in 1 that had PTFE (Teflon) in it, and went with that. Take lots
of pictures as you disassemble, and you'll be fine.
Bruce Whitmore C&C 37/40+
Sent from Samsung tablet._______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
