Same here but I used this nonskid: https://www.amazon.com/Incom-RE6511GR-Softex-Vinyl-Safety/dp/B002GTT8XS
Also use it on the floor of the dinghy. Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Dec 31, 2018 at 9:16 AM Matthew L. Wolford via CnC-List < cnc-list@cnc-list.com> wrote: > I sanded and re-varnished my stairs (several coats) about six years ago. > I used Treadmaster stick-on pads, which have worked well, were relatively > inexpensive, and have held up. > > *From:* T power via CnC-List <cnc-list@cnc-list.com> > *Sent:* Saturday, December 29, 2018 8:22 PM > *To:* cnc-list@cnc-list.com > *Cc:* T power <sv_invic...@outlook.com> > *Subject:* Re: Stus-List Teak treads refinishing > > I did mine three years ago, here's what I did; > > - scraped down to bare wood, two coats of epoxy (special clear). > - Two coats of Ephanias gloss varnish. > - Taped off the stairs except where I wanted the treads, applied one > coat of gloss varnish, sprinkled coarse salt. once dry I washed away the > salt, leaving behind a clear skid pattern, > - Two more coats of gloss, followed by three coats of Pettit Sea Gold > satin > - Plywood back (next to engine has three coats of epoxy primer and > three coats of two part polyurethane whit paint > > Stairs are still looking good and grippy when needed. > > Cheers, > > Tom Power > Invictus > C&C 30 MK1 > Fredericton, NB > ------------------------------ > *From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Rod Stright > via CnC-List <cnc-list@cnc-list.com> > *Sent:* Saturday, December 29, 2018 5:54 PM > *To:* cnc-list@cnc-list.com > *Cc:* Rod Stright > *Subject:* Stus-List Teak treads refinishing > > > Has anyone refinished the teak stair treads going down to the main cabin > from the companionway, if so what did you use and how well did it stand up > to all the traffic. > > Thanks > > Rod > > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > Virus-free. > www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > ------------------------------ > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
