For a FLOATING dock, 3 inches wider than the boat will work. Joe Coquina From: Jeremy Ralph [mailto:jeremy.ra...@gmail.com] Sent: Tuesday, August 07, 2018 2:13 PM To: Della Barba, Joe <joe.della.ba...@ssa.gov> Cc: cnc-list@cnc-list.com Subject: Re: [EXTERNAL] Stus-List How narrow a berth is too narrow
Thanks for the info Joe. The tide here fluctuates 15' but it's a floating dock so I'm sure that would have an impact. On Tue, Aug 7, 2018 at 11:08 AM, Della Barba, Joe <joe.della.ba...@ssa.gov<mailto:joe.della.ba...@ssa.gov>> wrote: I am in a very narrow slip. My beam is 10.5 feet and I think the slip is 12. It is kind of PITA to get the lines and fenders all set, but I save about $1000 for doing so. Joe Coquina Forgot – what is the tide? If you have a lot of tidal range you won’t be able to do this From: CnC-List [mailto:cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>] On Behalf Of Jeremy Ralph via CnC-List Sent: Tuesday, August 07, 2018 2:04 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Jeremy Ralph <jeremy.ra...@gmail.com<mailto:jeremy.ra...@gmail.com>> Subject: [EXTERNAL] Stus-List How narrow a berth is too narrow I have an opportunity for a new slip an a highly desirable location. From the edge of the finger to the neighboring boat is 12' and my beam is 11' not counting fender width. Is less than 1' between too narrow or do you think I can make it work? Thanks, Jeremy 78 34-1 #41
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
