Brian, I haven't been in my anchor locker in a while, but I don't recall seeing a wood backing plate. I will check this week. This would be a good time to replace it with some G10 or something similar.
Jake Jake Brodersen C&C 35 Mk-III "Midnight Mistress" Hampton VA -----Original Message----- From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of Brien Sadler via CnC-List Sent: Sunday, May 13, 2018 21:30 To: cnc-list@cnc-list.com Cc: Brien Sadler <brien.sad...@gmail.com> Subject: Stus-List Bow weldment problem. Listers, I was in my chain locker today on TAZ looking at where the wire for the running lights passes through the hull and into the chain locker, when I noticed that there is a piece of wood partially surrounded by fiberglass that looks like a backing for attaching the bow weldment with the chocks on it to the deck. This piece of wood is completely rotten and the bow weldment is now loose. Has anyone with a 35-3 run into this problem and if you did what did you do to fix. Thanks for your help. Brien Sadler S/V TAZ 1987 C&C 35 Mk III Sent from my iPad _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
