Thanks for the replies. What about the sizing question: ¼ vs 3/16 material for a 1 shaft? What have others used?
Jason Ainslie, Spirit 1984 C&C 35-3 Bayfield, ON _____ From: bwhitmore [mailto:bwhitm...@sbcglobal.net] Sent: May-10-18 11:33 PM To: cnc-list@cnc-list.com Cc: Ainslie Subject: Re: Stus-List Stuffing box material I've only put 3 rings in before, with the cuts for each ring equidistant from one another. You should be fine. Bruce Whitmore Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Ainslie via CnC-List <cnc-list@cnc-list.com> Date: 5/10/18 8:47 PM (GMT-05:00) To: cnc-list@cnc-list.com Cc: Ainslie <ains...@hay.net> Subject: Stus-List Stuffing box material Hello, The stuffing box on my 35 Mk 3 had a steady drip last fall, so I repacked it recently. According to my callipers, I could use ¼ flax in the gland nut (1 shaft). This seemed to pack in easily enough, but I was only able to get three rings in and still have enough threads on the nut. However, I had pulled four rings out! Theres no way I could get four of these quarter-inch rings in. My question: have I made a mistake should I have used 3/16 material? As I mentioned, the packing seemed to fit into the gland fairly easy with just finger-pushing, but could this overheat the shaft, and are three rings enough? Launch is next Wednesday, so Id have to move quickly if I need to downsize it to 3/16. Thanks! Jason Ainslie, Spirit 1984 C&C 35-3 Bayfield, ON <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam paign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam paign=sig-email&utm_content=emailclient> www.avg.com
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
