Mike,
Rod's Machine Shop, 114 Wright Ave, Burnside Industrial Park, (902)
468-2046. I have used them before on various things.....not the
cheapest but very high quality work.
I explained to them the difficult time getting the tank out of the
lazarette....the depth of the tank itself was O.K. but the 90 degree
infill connector welded to the top of the tank was just a little bit of
a problem....impressed upon them they couldn't add any more depth with
the repairs to the bottom or I wouldn't get the tank back in with the
existing welded aluminum infill connector. So they cut approx. 1 inch
off the bottom of the tank and added approx. 1/4 inch ...so the net
effect the tank went back in with ease.....maybe 1/2 to 3/4 inch clearance.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
On 2018-04-09 9:58 AM, mike amirault via CnC-List wrote:
Rob, which shop did the welding on your aluminum tank?
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
