The anti slime bit. I find that if you can stop the slime then you significantly reduce the amount of other growth that occurs, hard or otherwise. I agree that there's likely very little difference in the paint other than that, but if you're expecting to get SR60 or similar, you're going to be disappointed and to bear that in mind when deciding to get the work done up here in the frozen north. ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Jim Watts via CnC-List <cnc-list@cnc-list.com> Sent: April 6, 2018 3:16:35 PM To: 1 CnC List Cc: Jim Watts Subject: Re: Stus-List Sidney boat yard
Paul, Canadian paints are very similar to US paints except for the anti-slime additives. Most use copper in the formulations. What do you think is missing? Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 5 April 2018 at 21:04, Paul Baker via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: Just remember you'll get Canadian spec paint, which doesn't have anything at all that actually stops fouling, nor any anti-slime additives. ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> on behalf of Tom Buscaglia via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: April 5, 2018 3:48 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Tom Buscaglia Subject: Stus-List Sidney boat yard Alan The CSR yard in Des Moines is even closer. But, I can save 25-30% due to exchange rate and no sales tax. Also, there’s a super Yanmar mechanic that I want to do some work. Fun adventure too... Tom Buscaglia S/V Alera 1990 C&C 37+/40 Vashon WA P 206.463.9200<tel:206.463.9200> C 305.409.3660<tel:305.409.3660> On Apr 5, 2018, at 2:45 PM, cnc-list-requ...@cnc-list.com<mailto:cnc-list-requ...@cnc-list.com> wrote: Message: 1 Date: Thu, 5 Apr 2018 14:44:07 -0700 From: ALAN BERGEN <trya...@alumni.usc.edu<mailto:trya...@alumni.usc.edu>> To: "C&C" <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Subject: Re: Stus-List Sidney boat yard Message-ID: <CABnKnf0YX6Ak=2mAdW18kznTZTuKHjF=-l-a_fzfk-sad0g...@mail.gmail.com<mailto:CABnKnf0YX6Ak=2mAdW18kznTZTuKHjF=-l-a_fzfk-sad0g...@mail.gmail.com>> Content-Type: text/plain; charset="utf-8" Why Sidney when Port Townsend and Port Angeles are a lot closer.\? Alan On Thu, Apr 5, 2018 at 2:19 PM, Tom Buscaglia via CnC-List < cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I am thinking about taking Alera up to Sidney for her bi annual haul out. Nothing major, just the usual zinc and bottom paint, etc. Any recommendations? Tom Buscaglia S/V Alera 1990 C&C 37+/40 Vashon WA P 206.463.9200 C 305.409.3660 _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
