Thanks! Sent from my iPad
James Bibb NorthWind Architects LLC 126 Seward St. Street Juneau, Alaska. 99801 (907) 321-4265 cell (907) 586-6150 ext 5 wk > On Apr 4, 2018, at 11:16 AM, Josh Muckley via CnC-List > <cnc-list@cnc-list.com> wrote: > > Normally a conduit is riveted to the forward side of the mast. You'll > probably want to have a service disconnect terminal block at the base of the > mast if it doesn't already exist. Any existing spade/ring terminals will > probably need to be cut off before pulling the existing cable out. Secure a > string to the cable very well and pull the cable out the top of the mast. > Reattach the new cable to the string and pull it back down. Cut to length > leaving an extra foot or two. Crimp on some terminals and reattach to the > terminal block. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > >> On Wed, Apr 4, 2018, 2:07 PM James Bibb via CnC-List <cnc-list@cnc-list.com> >> wrote: >> 34-36R with a pretty skinny tall mast…anybody have any experience upgrading >> the wind sensor and VHF while the mast is in-place? I need to know if >> there’s a conduit running and what to expect as I may be the person scaling >> the mast and I want to make the least number of trips to the top? >> >> And…if somebody’s done this, what where the learning moments? >> >> Thanks. >> >> James. Bibb >> >> SV Darwin’s Folly >> C&C 34-36R >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
