Hi Edd Spring projects mostly the regular commissioning for Persistence:
Pressure wash, wet sand and prep bottom (done in the Fall) Lower each pad and clean/prep/paint under pad (done in Fall) Scrub deck and Topsides (done) Wax topsides (done) Apply and wet sand two thin coats bottom Paint (Amercoat ABC4 – done) Sand and Apply coats of cetol to handrails and varnish around companionway (done) Sand and apply coats of cetol light to forward toerails (May) Replace shaft anodes (done) Grease prop gears (Flex-o-Fold – done) Wipe down interior Light sand and one coat epiphanes matt varnish to cabin sole Replace fuel filters in Racor and engine (Yanmar 3GM30F) Oil change (done last Fall) Cross fingers and hope engine starts Launching today Mike Persistence Halifax, NS From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay via CnC-List Sent: Tuesday, April 03, 2018 2:16 PM To: Edd Schillay via CnC-List Cc: Edd Schillay Subject: Stus-List Spring Projects Listers, Now that April is finally here, I was curious as to what you have planned for your Spring projects. On the Enterprise: 1. Remove and service hydraulic autopilot pump 2. Re-vinyl Starfleet markings 3. Service Refrigeration 4. Install new hot water heater 5. Paint bottom … and if you’re down south somewhere and have been in the water and sailing already, I hate you. All the best, Edd Edd M. Schillay Starship Enterprise C&C 37+ | Sail No: NCC-1701-B City Island, NY Starship Enterprise's Captain's Log<http://enterpriseb.blogspot.com/>
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
