The other thing we found out when we did our windows was that the Plexus that
had been used to install the original windows was so hard and tightly bonded to
the fiberglass that it made a fine substrate to adhere to using the 3M VHB
tape. Thus, the complaints others have mentioned about having to paint to
avoid chips and marks showing through, etc. was not a problem for us.
Your mileage may differ,
Bruce Whitmore
(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net
From: Paul Fountain via CnC-List <cnc-list@cnc-list.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Cc: Paul Fountain <p...@seasource.ca>
Sent: Saturday, February 10, 2018 3:34 PM
Subject: Re: Stus-List C&C 37+ window replacement
#yiv1638678723 #yiv1638678723 -- .yiv1638678723EmailQuote
{margin-left:1pt;padding-left:4pt;border-left:#800000 2px solid;}#yiv1638678723
Mark, you want cast and 3/8”. The first time mine were done the ‘expert’ used
1/4 which I did not know until I had both crack after just 3 years. He did not
polish or bevel the edges either.... and did a lot of damage to the opening.
When we re did them I got the windows made at SOUTHSHORE as Rob had the
original patterns, the had the installer, re do the openings, he was a highly
regarded fibreglass repairman who’s work looks great including matching the gel
coat.
Get Outlook for iOSFrom: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of
Mark Baldridge via CnC-List <cnc-list@cnc-list.com>
Sent: Friday, February 9, 2018 7:20:06 PM
To: cnc-list@cnc-list.com
Cc: Mark Baldridge
Subject: Stus-List C&C 37+ window replacement Hi All,
I'm in discussion with the yard to replace the fixed windows on my
37/40+ this spring. They barely leak, but there are vertical splits on
both sides of the forward windows and in big downpours do leak. I
currently have blue tape on them to stop the leaks when I'm not around.
I want them replaced and looking sharp before the wife picks out new
upholstery for the interior.
So far I'm looking at having them use 3M 4991 VHB tape and Dow 795
caulking. For those that have this done, any tips I should pass on to
the folks doing the work.
Also what was used for the windows, "cast" plexiglass? and what
thickness? I've read 3/8 in posts, but I've been told 1/4" would work
better due to the curvature of the adhesion area.
Thanks,
Mark Baldridge
~~~~~~~~~~~~~~~~~~~~~~_/)
'89 C&C 37/40+ "The Edge"
Surf City, NC
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
