I also understand there is a 'throttle tension screw' under the compass
of the Edson pedestal.
Any advice/experience with this adjustment is appreciated.
Rob
On 2017-12-07 4:23 PM, robert via CnC-List wrote:
My *throttle* cable has a clamp on it which crushes the outer cable to
provide sufficient friction on the inner cable to overcome the force
of the *return spring* in the diesel pump *throttle* lever.
Has anyone any experience removing the 'clamp' on the cable and
adjusting only the 'return spring' to properly tension the throttle
cable so that it stays at a set RPM rather than slowing decreasing
until it reaches it 'set point'.
I somewhat like the idea of tensioning the 'return spring' instead of
using an 'adjustable clamp' on the throttle cable.
Rob Abbott
AZURA
C&C 32 - 84
Halifax, N.S.
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
_______________________________________________
Thanks everyone for supporting this list with your contributions. Each and
every one is greatly appreciated. If you want to support the list - use PayPal
to send contribution -- https://www.paypal.me/stumurray
