Don, Check out this article.
http://www.pbase.com/image/75740279 Long story short - get it fitted and faced according to him. Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Nov 26, 2017 11:13 AM, "DON JONSSON via CnC-List" <cnc-list@cnc-list.com> wrote: Hi We are in the process of replacing our old Yanmar 3GMD motor with a Beta. The old coupler doesn't match the beta and besides it is old. We are looking at a split shaft coupler from Beta. We are getting mixed information as to whether the shaft needs to come out of the boat and the new coupler mated to the shaft, or fitted and faced I guess are the terms. As far as I know the shaft is not bent. It is a bit pitted where it goes into the coupler although the mechanic said we could just shine it up. We plan to put a flexible shaft coupler in between the split shaft coupler and the back of the transmission. Any advice on the right steps? Thanks Don Swan Song (soon to be Andante), C&C 34 Victoria Sent from my iPad _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
