Not sure I follow. Considering that the toe rail as holes from bow to stern, I can get a perpendicular angle in both dimensions and in a shorter distance than at the end of the boom.
We typically don't use a preventer un less we are in a broad reach or run with the boom out a good way. Neil C&C 32 Neil Andersen 20691 Jamieson Rd Rock Hall, MD 21661 ________________________________ From: Gary Smith <gary.smith....@gmail.com> Sent: Saturday, July 15, 2017 4:29:44 AM To: cnc-list@cnc-list.com Cc: Neil Andersen; Tortuga Subject: Re: Stus-List Preventer or boom brake for C&C30/1 There are some who advocate against using the vang attachment point and if you think about it, it makes sense. The vang is too close to the mast so all of the force on the sail will result in huge leverage forces. I've heard of broken booms as a result. The ideal is to use the main sheet eye so long as you can get enough of an angle on the preventer line - as close as perpendicular to the boom as possible. On 15 Jul 2017 4:21 am, "Neil Andersen via CnC-List" <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I assume you have a hard vang? We have one made of line an use it as the preventer. We un clear it from the base of the mast and run it over to the toe rail. Neil C&C 32 Neil Andersen, M.Sc., CISSP, CISM Auburn, NY 13021 ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> on behalf of Tortuga via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Sent: Friday, July 14, 2017 8:58:17 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Tortuga Subject: Stus-List Preventer or boom brake for C&C30/1 I'm looking for advice please. I've been thinking for a while about installing permanent preventers or a boom brake on my 30. In the meantime I attach a preventer, when I think it's required, to either the mainsheet eye or to the vang attachment. This week, as I was moving the preventer, we were overtaken by a rain squall which resulted in a nasty gybe. Nobody was injured, but it scared me into rethinking my preventer. Our boom has 2 eyes: one at the end, where the mainsheet attaches and the other about a third of the length from the mast, where the vang attaches. I'd like to make a third attachment for a preventer or boom brake about half way along the boom, but I don't know how to do it. A bale, I think, will not withstand the lateral strain of a gybe. A friend recommended a T-ball fitting, but it also is made to withstand strain from one direction only, I think. Can anyone recommend a fitting that will attach to the boom and withstand the strain of a forced gybe? Also is there collected wisdom about preventers vs boom brakes, etc.? Thanks Derek Tortuga, C&C 30 mk1 #553 Ballantynes Cove, NS _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
