When I initially put a solid piece of plywood to cover the gap one day the temperature warning lamp lit up on the control panel. That's when I decided to drill a couple holes in the plywood. I've been nervous to actually have the plywood in place at all since that day as well.
On Thu, Jun 8, 2017 at 8:03 PM Adam Hayden via CnC-List < cnc-list@cnc-list.com> wrote: > A few of you have mention that you have netting to separate the engine and > lazerette. Does the engine need the airflow from the lazerette for > cooling? The engines are usually raw water or fresh water cooled as > opposed to air cooled. I was just curious? I have a 36 and have had a > few items fall onto the shaft and like others mentioned burned a bit of > plastic. Fortunately lines are on the outboard side away from the engine > area. It is one of those things I would like to do as well, but have more > pressing projects. > > Adam hayden > C&C 36 > > Get Outlook for Android <https://aka.ms/ghei36> > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
