Jim, Did you do the install? How does the shelf fit into the locker? I tried to start mocking up an installation of my own based loosely on Dave Godwin's. http://roninrebuild.blogspot.com/2014/10/anchor-windlass-shelf.html?m=1
I quickly discovered that my solid cardboard shelf couldn't be removed if kept flat and straight like a board that went full width of the locker. Does yours have any support beneath? What about fasteners to anchor the shelf to the bulkhead? Or is it all just epoxy and fiberglass tabs? Discussed with Dave and he agrees that a hybrid of his install and Tom Buscaglia's would be ideal. https://www.flickr.com/photos/37365243@N00/15752113372/in/album-72157629350057893/ https://www.flickr.com/photos/37365243@N00/15565407757/in/album-72157629350057893/ Thanks, Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On May 28, 2017 9:49 PM, "Jim Watts via CnC-List" <cnc-list@cnc-list.com> wrote: Here's mine, you can come over and look at it if you want. http://imgur.com/MUSwCr0.jpg Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 28 May 2017 at 12:01, Persuasion37 via CnC-List <cnc-list@cnc-list.com> wrote: > I'm away from home for a few days but I'll send you some off list when I > get back. > > Mike > PERSUASION > C&C 37 K/CB > Long Sault > > On May 28, 2017, at 9:45 AM, Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > > Mike, do you have any pictures? > > Josh > > On May 28, 2017 8:43 AM, "Persuasion37 via CnC-List" < > cnc-list@cnc-list.com> wrote: > >> I mounted mine in the anchor locker on a shelf I constructed from 1.5" >> plywood. It is wedged shaped at the ends to fit the hull, and tabbed to the >> bulkhead. I have a capstan with chain gypsy and used a hole saw to cut a >> hole in the anchor locker lid to accommodate the capstan. No noticeable >> loss of strength to the lid. >> >> Mike >> PERSUASION >> C&C 37 K/CB >> Long Sault >> >> > On May 28, 2017, at 8:17 AM, John and Maryann Read via CnC-List < >> cnc-list@cnc-list.com> wrote: >> > >> > Hi Don >> > >> > We do not have a windlass but I know there are lots of threads of >> windlasses >> > for larger boats. Might want to look there??? >> > >> > I once saw a 34 with windlass mounted to a large board that crossed the >> aft >> > edge of the chain locker. As I recall, the aft section of the locker >> cover >> > was cut off to accommodate. Would not recommend it >> > >> > John and Maryann >> > Legacy III >> > 1982 C&C 34 >> > Noank, CT >> > -----Original Message----- >> > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of DON >> > JONSSON via CnC-List >> > Sent: Saturday, May 27, 2017 11:47 PM >> > To: cnc-list@cnc-list.com >> > Cc: DON JONSSON >> > Subject: Stus-List One more kick at windlass for C&C 34 >> > >> > Hi All >> > >> > I asked before if anyone has an electric windlass on a C&C 34. >> Although I >> > got great advice no pictures of one mounted on a 34. I'm hoping >> someone out >> > there has a C&C 34 with an electric windlass that they think has been >> set up >> > well and could either provide a description of where it is or a quick >> > picture. So I'm asking one more time. >> > >> > Thanks >> > Don Jonsson >> > Swansong, C&C 34 >> > Victoria, BC >> > >> > Sent from my iPad >> > _______________________________________________ >> > >> > This list is supported by the generous donations of our members. If you >> wish >> > to make a contribution to offset our costs, please go to: >> > https://www.paypal.me/stumurray >> > >> > All Contributions are greatly appreciated! >> > >> > >> > _______________________________________________ >> > >> > This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> > >> > All Contributions are greatly appreciated! >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
