Here's mine, you can come over and look at it if you want. http://imgur.com/MUSwCr0.jpg
Jim Watts Paradigm Shift C&C 35 Mk III Victoria, BC On 28 May 2017 at 12:01, Persuasion37 via CnC-List <cnc-list@cnc-list.com> wrote: > I'm away from home for a few days but I'll send you some off list when I > get back. > > Mike > PERSUASION > C&C 37 K/CB > Long Sault > > On May 28, 2017, at 9:45 AM, Josh Muckley via CnC-List < > cnc-list@cnc-list.com> wrote: > > Mike, do you have any pictures? > > Josh > > On May 28, 2017 8:43 AM, "Persuasion37 via CnC-List" < > cnc-list@cnc-list.com> wrote: > >> I mounted mine in the anchor locker on a shelf I constructed from 1.5" >> plywood. It is wedged shaped at the ends to fit the hull, and tabbed to the >> bulkhead. I have a capstan with chain gypsy and used a hole saw to cut a >> hole in the anchor locker lid to accommodate the capstan. No noticeable >> loss of strength to the lid. >> >> Mike >> PERSUASION >> C&C 37 K/CB >> Long Sault >> >> > On May 28, 2017, at 8:17 AM, John and Maryann Read via CnC-List < >> cnc-list@cnc-list.com> wrote: >> > >> > Hi Don >> > >> > We do not have a windlass but I know there are lots of threads of >> windlasses >> > for larger boats. Might want to look there??? >> > >> > I once saw a 34 with windlass mounted to a large board that crossed the >> aft >> > edge of the chain locker. As I recall, the aft section of the locker >> cover >> > was cut off to accommodate. Would not recommend it >> > >> > John and Maryann >> > Legacy III >> > 1982 C&C 34 >> > Noank, CT >> > -----Original Message----- >> > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of DON >> > JONSSON via CnC-List >> > Sent: Saturday, May 27, 2017 11:47 PM >> > To: cnc-list@cnc-list.com >> > Cc: DON JONSSON >> > Subject: Stus-List One more kick at windlass for C&C 34 >> > >> > Hi All >> > >> > I asked before if anyone has an electric windlass on a C&C 34. >> Although I >> > got great advice no pictures of one mounted on a 34. I'm hoping >> someone out >> > there has a C&C 34 with an electric windlass that they think has been >> set up >> > well and could either provide a description of where it is or a quick >> > picture. So I'm asking one more time. >> > >> > Thanks >> > Don Jonsson >> > Swansong, C&C 34 >> > Victoria, BC >> > >> > Sent from my iPad >> > _______________________________________________ >> > >> > This list is supported by the generous donations of our members. If you >> wish >> > to make a contribution to offset our costs, please go to: >> > https://www.paypal.me/stumurray >> > >> > All Contributions are greatly appreciated! >> > >> > >> > _______________________________________________ >> > >> > This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> > >> > All Contributions are greatly appreciated! >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!