Thanks, Gary. I will try that. I initialized it from one of
the Tritons but not the Zeus. Currently, the Zeus only sees itself.
Jim
Get Outlook for iOS
On Sat, May 27, 2017 at 8:46 PM -0500, "Gary Russell via CnC-List"
<cnc-list@cnc-list.com> wrote:
The bus must be initialized by the Zeus MFD. Try reinitializing the network
from the Zeus2. As I recall, it will tell you what devices it sees on the
network.GaryS/V Kaylarah'90 C&C 37+East Greenwich, RI, USA
~~~~~~~_/)~~~~~~
On Sat, May 27, 2017 at 5:01 PM, Jim Reinardy via CnC-List
<cnc-list@cnc-list.com> wrote:
Having big instrument issues to start the season and going
crazy trying to figure it out. This is all B&G equipment including a Zeus Touch
7 and three Triton displays. All displays power up fine but I am getting no
data from wind, depth, speed or compass transducers. The diagnostic on the
displays say that the NMEA 2000 bus is off, but I don't know why.
The red and black wires show 12v at all points I can measure. The resistance
of white and blue is 60 ohms with both ends terminated, 120 ohms with either
terminator off, and about 20k ohms with both terminators off. This seems
normal based on articles I found online. I have also tried taking each piece of
equipment out of the loop as best I can. Nothing I do seems to give me a
network. Any ideas what I am missing?
Thanks,
Jim ReinardyC&C 30-2 "Firewater"Milwaukee, WI
Get Outlook for iOS
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
