Having big instrument issues to start the season and going crazy trying to figure it out. This is all B&G equipment including a Zeus Touch 7 and three Triton displays. All displays power up fine but I am getting no data from wind, depth, speed or compass transducers. The diagnostic on the displays say that the NMEA 2000 bus is off, but I don't know why. The red and black wires show 12v at all points I can measure. The resistance of white and blue is 60 ohms with both ends terminated, 120 ohms with either terminator off, and about 20k ohms with both terminators off. This seems normal based on articles I found online. I have also tried taking each piece of equipment out of the loop as best I can. Nothing I do seems to give me a network. Any ideas what I am missing? Thanks, Jim ReinardyC&C 30-2 "Firewater"Milwaukee, WI
Get Outlook for iOS
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!