That is odd Mark, I've bought acrylic from them 3 times without problems. They sold me a half sheet 2 x 8 last time.
It may be that asking for 9mm is confusing things, I'd call them and ask for 3/8th inch. Graham Collins Secret Plans C&C 35-III #11 On 2017-04-04 5:12 PM, Dr. Mark Bodnar via CnC-List wrote: > > Anyone know where to get sheets of acrylic in Halifax area? I've done > some searching and Piedmont Plastics is the only supplier that seems > to come up. > I'm waiting on them to get back to me with a price for a 4x8' sheet of > 9mm acrylic - or even if they have any cut off etc -- but they didn't > seem like they had any in stock and were unsure about pricing or > availability. > > I got the 3M VHB tape last summer and plan on replacing the > replacement this spring. > > Mark > > > There is no cure for birth and death save to enjoy the interval. > - George Santayana > > On 2017-04-04 3:35 PM, Paul Fountain via CnC-List wrote: >> http://www.cutplasticsheeting.co.uk/blog/2011/05/08/175/ >> >> Gives a good explanation .... but its clearer, and harder more >> scratch resistant, and similar properties in all directions. >> >> -----Original Message----- >> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of >> Bruce Whitmore via CnC-List >> Sent: Tuesday, April 4, 2017 2:21 PM >> To: cnc-list@cnc-list.com >> Cc: Bruce Whitmore <bwhitm...@sbcglobal.net> >> Subject: Re: Stus-List Windows Pt 2. >> >> Hi Paul, >> >> I don't remember the reason. Why cast? What is the other type? >> >> Kindest Regards, >> >> Bruce >> 847.404.5092 >> >> Please forgive any typos as this was sent from my iPhone. >> >>> On Apr 4, 2017, at 2:13 PM, Paul Fountain via CnC-List >>> <cnc-list@cnc-list.com> wrote: >>> >>> And be sure its cast ....... >>> >>> -----Original Message----- >>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of >>> Bruce Whitmore via CnC-List >>> Sent: Tuesday, April 4, 2017 2:01 PM >>> To: cnc-list@cnc-list.com >>> Cc: Bruce Whitmore <bwhitm...@sbcglobal.net> >>> Subject: Re: Stus-List Windows Pt 2. >>> >>> Remember to use plexiglass, not Lexan. Lexan will scratch and craze. >>> >>> Kindest Regards, >>> >>> Bruce >>> 847.404.5092 >>> >>> Please forgive any typos as this was sent from my iPhone. >>> >>>> On Apr 4, 2017, at 12:39 PM, Eric Baumes via CnC-List >>>> <cnc-list@cnc-list.com> wrote: >>>> >>>> I spoke to a local fabricator about making the windows. >>>> >>>> We spoke for a while about the curvature of the windows and whether >>>> they would have to be thermoformed. >>>> >>>> I know the windows curve to match the curve of the cabin top, but >>>> are they at all curved vertically? >>>> >>>> Researching Lexan is seems you can cold bend it as long as the >>>> radius is 10x the thickness. >>>> >>>> For anyone who has done this on a 34/36 or 37/40, were the >>>> replacement windows flat stock? >>>> >>>> Thanks, >>>> >>>> Eric >>>> S/V Hee Soo >>>> 34/36 >>>> _______________________________________________ >>>> >>>> This list is supported by the generous donations of our members. If >>>> you wish to make a contribution to offset our costs, please go to: >>>> https://www.paypal.me/stumurray >>>> >>>> All Contributions are greatly appreciated! >>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If >>> you wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If >>> you wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If >> you wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If >> you wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> > > > _______________________________________________ > > This list is supported by the generous donations of our members. If > you wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > . > _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
