Anyone know where to get sheets of acrylic in Halifax area? I've done
some searching and Piedmont Plastics is the only supplier that seems to
come up.
I'm waiting on them to get back to me with a price for a 4x8' sheet of
9mm acrylic - or even if they have any cut off etc -- but they didn't
seem like they had any in stock and were unsure about pricing or
availability.
I got the 3M VHB tape last summer and plan on replacing the replacement
this spring.
Mark
There is no cure for birth and death save to enjoy the interval.
- George Santayana
On 2017-04-04 3:35 PM, Paul Fountain via CnC-List wrote:
http://www.cutplasticsheeting.co.uk/blog/2011/05/08/175/
Gives a good explanation .... but its clearer, and harder more scratch
resistant, and similar properties in all directions.
-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce
Whitmore via CnC-List
Sent: Tuesday, April 4, 2017 2:21 PM
To: cnc-list@cnc-list.com
Cc: Bruce Whitmore <bwhitm...@sbcglobal.net>
Subject: Re: Stus-List Windows Pt 2.
Hi Paul,
I don't remember the reason. Why cast? What is the other type?
Kindest Regards,
Bruce
847.404.5092
Please forgive any typos as this was sent from my iPhone.
On Apr 4, 2017, at 2:13 PM, Paul Fountain via CnC-List <cnc-list@cnc-list.com>
wrote:
And be sure its cast .......
-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruce
Whitmore via CnC-List
Sent: Tuesday, April 4, 2017 2:01 PM
To: cnc-list@cnc-list.com
Cc: Bruce Whitmore <bwhitm...@sbcglobal.net>
Subject: Re: Stus-List Windows Pt 2.
Remember to use plexiglass, not Lexan. Lexan will scratch and craze.
Kindest Regards,
Bruce
847.404.5092
Please forgive any typos as this was sent from my iPhone.
On Apr 4, 2017, at 12:39 PM, Eric Baumes via CnC-List <cnc-list@cnc-list.com>
wrote:
I spoke to a local fabricator about making the windows.
We spoke for a while about the curvature of the windows and whether they would
have to be thermoformed.
I know the windows curve to match the curve of the cabin top, but are they at
all curved vertically?
Researching Lexan is seems you can cold bend it as long as the radius is 10x
the thickness.
For anyone who has done this on a 34/36 or 37/40, were the replacement windows
flat stock?
Thanks,
Eric
S/V Hee Soo
34/36
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!