I've heard that Kraco still has many old molds and can fabricate new tanks. Approximately 10 years ago I was able to get a new tank for under the Vee berth for my 1982 C&C 32
Neil Andersen Auburn, NYFoxfire On Mon, Mar 6, 2017 at 8:56 PM -0500, "Steve Thomas via CnC-List" <cnc-list@cnc-list.com> wrote: The water tanks on my C&C36 both leak at cracks that have formed radial to the inspection ports. 3 out of 4 ports have leaks. Thinking of trying the hot air plastic welding thing, but I have to wonder how long such repairs might last. Pretty much nothing sticks to polyethylene, so I know of no other repair option than welding. The exact tanks used are not listed on any of the tank supplier sites. There is also a leak somewhere around the hot water tank, but it is a lot slower and I have not found it yet. I can hardly wait to test the waste tank. Steve Thomas C&C36 Merritt Island, FL ---- Al Serrato via CnC-List wrote: I noticed recently that my water system has a leak in it somewhere. I don't use internal water too often, so I'm not sure when or how it started. When I went to fill the tank yesterday, I noticed that the water level dropped quickly in the tube and I started getting water in the bilge. I was short on time, so I didn't have a chance to try to find the source of the problem. Just thought I'd start by asking whether there's a usual culprit when this occurs - a place to check first - and if any one has suggestions as to how best to diagnose where the leak is coming from. I imagine that some of the water lines might be hard to see or access, and I'm not quite sure where to start. Thanks in advance for any advice/help. Al Serrato 1981 C & C 34 "Senza Fine" San Francisco Bay _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
