Thanks everyone. The initial epoxy job turned out great. I ran a heater in the head since it was only 50 or so on the boat and it set up fine. Any water getting in there will have no more access to the core. I next need to get the hole positions set and fill them with epoxy. Butyl tape does seem the best way to seal this to the deck too.
Joe Coquina C&C 35 MK I From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny Haughey via CnC-List Sent: Tuesday, February 28, 2017 08:56 To: cnc-list@cnc-list.com Cc: Danny Haughey <djhaug...@juno.com> Subject: Re: Stus-List caulk question and West 6-10 to the rescue yes agreed, I can't believe I left that part out! LOL thats why it took me so much time on the hatches, well that and removing the effing silicone! I hate that stuff! On 2/28/2017 8:41 AM, Hoyt, Mike via CnC-List wrote: Joe I would suggest overdrilling and filling with thickened epoxy and then redrilling. Whatever you use for sealant is not there to protect your deck as much as to keep the cabin dry. The epoxy is to protect the core. My $0.02 Mike Persistence From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny Haughey via CnC-List Sent: Monday, February 27, 2017 5:24 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Danny Haughey Subject: Re: Stus-List caulk question and West 6-10 to the rescue I would suggest butyl and thru-bolting On 2/27/2017 4:15 PM, Marek Dziedzic via CnC-List wrote: may I suggest butyl tape and mounting screws? Marek From: Joe Della Barba via CnC-List Sent: Monday, February 27, 2017 14:54 To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Joe Della Barba Subject: Stus-List caulk question and West 6-10 to the rescue Questions - the new vent does not fit into a deck plate, it is designed to mount directly to the deck. They suggest using silicone caulk. I already have 4200, would that work? Also I my experience, something with that much flat surface against the deck is going to be very well glued on by the caulk. I doubt it will ever come loose unless I run a blade under it, so do I need to bother with the mounting screws into the deck? Joe Della Barba j...@dellabarba.com<mailto:j...@dellabarba.com> Coquina C&C 35 MK I _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
