Joe

I would suggest overdrilling and filling with thickened epoxy and then 
redrilling.  Whatever you use for sealant is not there to protect your deck as 
much as to keep the cabin dry.  The epoxy is to protect the core.

My $0.02

Mike
Persistence

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny 
Haughey via CnC-List
Sent: Monday, February 27, 2017 5:24 PM
To: cnc-list@cnc-list.com
Cc: Danny Haughey
Subject: Re: Stus-List caulk question and West 6-10 to the rescue


I would suggest butyl and thru-bolting

On 2/27/2017 4:15 PM, Marek Dziedzic via CnC-List wrote:
may I suggest butyl tape and mounting screws?

Marek

From: Joe Della Barba via CnC-List
Sent: Monday, February 27, 2017 14:54
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Joe Della Barba
Subject: Stus-List caulk question and West 6-10 to the rescue

Questions - the new vent does not fit into a deck plate, it is designed to
mount directly to the deck. They suggest using silicone caulk. I already
have 4200, would that work? Also I my experience, something with that much
flat surface against the deck is going to be very well glued on by the
caulk. I doubt it will ever come loose unless I run a blade under it, so do
I need to bother with the mounting screws into the deck?

Joe Della Barba
j...@dellabarba.com<mailto:j...@dellabarba.com>

Coquina
C&C 35 MK I



_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!




_______________________________________________



This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray



All Contributions are greatly appreciated!

_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to