What did you use to remove old adhesive i your windows Sent from my iPhone
> On Jan 9, 2017, at 10:07 AM, Neil Gallagher via CnC-List > <cnc-list@cnc-list.com> wrote: > > Peter, > > Not sure if anyone has addressed this, but I faced a similar situation on my > 35-1 which had been sitting for several years unused. I took the aluminum > tank out to thoroughly clean it, and found galvanized steel hold down straps > under the tank had caused so much corrosion that the tank started leaking. > Given my A4 engine with gasoline, I hate to think what could have happened. > I replaced it with a plastic tank, and am very happy with it. One advantage: > I can just look at the tank and see the level if (when) the gauge doesn't > work. > > Neil Gallagher > Weatherly, 35-1 > Glen Cove, NY > >> On 1/6/2017 10:17 AM, PETER OCAMPO via CnC-List wrote: >> Hello group >> >> Three questions >> >> 1 My boat has sat on hard for 3 years. Racor Fuel filter fuel was clear >> red. Not dusky 1/2 to 3/4 full Removed all fuel and replaced with new >> diesel fuel engine started fine. >> >> It was suggested that I have fuel tank polished estimated cost is $570 >> before I sail the boat from Newport ri to Portland Maine >> >> My question is it worth it or is it better just to replace original fuel >> tank with new fuel >> Tank and if so plastic or aluminum >> >> 2 Next question stuffing box was replaced by yard in 2012. Do I need to do >> it again before launch >> >> 3 Last question. All cabin top window I have had new ones made. What is the >> best way to attach. I have seen use of 4200 >> >> Thanks >> >> Peter >> >> 1983 C&c 40 aft cabin >> >> Sent from my iPhone >> >>> On Jan 5, 2017, at 10:23 PM, Gary Kolc via CnC-List <cnc-list@cnc-list.com> >>> wrote: >>> >>> I was given a stainless steel hillerange but the oven will not work. I have >>> the same range but it's one of those brown ones that is crappy looking but >>> working . I want to swap the oven controls what do you think doable? >>> >>> Gary ......"Liberty" >>> >>> Sent from my Verizon Wireless 4G LTE TabletOn Jan 5, 2017 8:15 PM, Joel >>> Aronson via CnC-List <cnc-list@cnc-list.com> wrote: >>>> Changed my thermostat as well. Was still working great when I sold The >>>> Office. >>>> >>>> Joel >>>> >>>>> On Thu, Jan 5, 2017 at 7:06 PM G Collins via CnC-List >>>>> <cnc-list@cnc-list.com> wrote: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> I changed the thermostat, the oven worked well for 2 years and then died >>>>> with different symptoms. Sure Marine was excellent to work with, only >>>>> praise for them. But I decided to move on and replaced it with a >>>>> >>>>> >>>>> >>>>> ENO 3 burner which is great. Slightly smaller, so I had to make new side >>>>> blocks and rework the gimbal lock at the bottom. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Graham Collins >>>>> >>>>> Secret Plans >>>>> >>>>> C&C 35-III #11 >>>>> >>>>> >>>>> >>>>> On 2017-01-05 7:22 PM, Pete Shelquist via CnC-List wrote: >>>>> >>>>> >>>>> >>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> So I’m trouble shooting my HilleRange oven and working with the guys >>>>>> over at Sure Marine. Sounds like I may need to send them the >>>>>> thermostat for repair. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Anyone gone down this road? Are there other options out there, other >>>>>> than buy a new oven? >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> Thanks, >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> >>>>>> >>>>>> >>>>>> This list is supported by the generous donations of our members. If you >>>>>> wish to make a contribution to offset our costs, please go to: >>>>>> https://www.paypal.me/stumurray >>>>>> >>>>>> >>>>>> >>>>>> All Contributions are greatly appreciated! >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> >>>>> >>>>> >>>>> This list is supported by the generous donations of our members. If you >>>>> wish to make a contribution to offset our costs, please go to: >>>>> https://www.paypal.me/stumurray >>>>> >>>>> >>>>> >>>>> All Contributions are greatly appreciated! >>>>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you wish >> to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you wish > to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!