Gary,
You are correct. The Flex-O-Fold prop is geared and no orientation is
necessary.
Other Gary
S/V Kaylarah
~~~~~~~_/)~~~~~~
On Tue, Jan 3, 2017 at 12:56 PM, Gary Nylander via CnC-List <
cnc-list@cnc-list.com> wrote:
> I disagree. The fact that the blades are geared to each other means that
> the
> blade that would normally drop is being held up by the blade which is on
> top. If it quits raining I'll go and prove it.
>
> Gary
> 30-1
> Flex-o-fold also
>
> -----Original Message-----
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Howard
> and Skippy via CnC-List
> Sent: Tuesday, January 3, 2017 12:47 PM
> To: cnc-list@cnc-list.com
> Cc: Howard and Skippy <emp...@optonline.net>
> Subject: Stus-List Flexi-o-Fold
>
> I replaced the Martec on my 35-3 many years ago with a Flex-0-Fold 2
> blade.
> Absolutely no complaints drives the boat very well. The only issue worth
> mentioning is you need to mark your prop shaft to note when the blades are
> at the 9 & 3 position when racing. otherwise, one blade may flop opened and
> create extra drag.
> Howard Paul, Skipper of Knot Again
>
> _______________________________________________
>
> This list is supported by the generous donations of our members. If you
> wish
> to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
>
> _______________________________________________
>
> This list is supported by the generous donations of our members. If you
> wish to make a contribution to offset our costs, please go to:
> https://www.paypal.me/stumurray
>
> All Contributions are greatly appreciated!
>
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
