I disagree. The fact that the blades are geared to each other means that the blade that would normally drop is being held up by the blade which is on top. If it quits raining I'll go and prove it.
Gary 30-1 Flex-o-fold also -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Howard and Skippy via CnC-List Sent: Tuesday, January 3, 2017 12:47 PM To: cnc-list@cnc-list.com Cc: Howard and Skippy <emp...@optonline.net> Subject: Stus-List Flexi-o-Fold I replaced the Martec on my 35-3 many years ago with a Flex-0-Fold 2 blade. Absolutely no complaints drives the boat very well. The only issue worth mentioning is you need to mark your prop shaft to note when the blades are at the 9 & 3 position when racing. otherwise, one blade may flop opened and create extra drag. Howard Paul, Skipper of Knot Again _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
