I picked up a Skipper ll on EBAY for a couple hundred bucks, works fine, then
i found a meter bundled with a laser heat sensor at Costco for around 40. I
don't remember where that one is, though!
Bill Coleman
-------- Original message --------
From: Kevin Driscoll via CnC-List <cnc-list@cnc-list.com>
Date: 11/8/16 16:37 (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: Kevin Driscoll <kevindrisc...@gmail.com>
Subject: Re: Stus-List Baltimore/Annapolis wet deck repair
While we are on the topic, could anyone recommend a good moisture meter for
personal use?
On Tue, Nov 8, 2016 at 12:38 PM Josh Muckley via CnC-List
<cnc-list@cnc-list.com> wrote:
I had a surveyor that in addition to the normal moisture meter used an infrared
camera. Temperature variances could show or confirm all types internal
inconsistencies. It was on the pricey side of the survey spectrum but provided
me a little extra peace of mind. ~$800.
Dave at coast2coast marine surveys.
You might also consider getting a IR camera attachment for yourself. In
addition to water ingress you can see electrical problems like high
resistance/corroded connections and engine problems like belt misalignments.
Christmas is coming. ~$200.
FLIR ONE Thermal Imager for Android
https://www.amazon.com/dp/B00W5PRY52/ref=cm_sw_r_cp_apa_mBJiybVJT2J45
Josh MuckleyS/V Sea Hawk1989 C&C 37+Solomons, MD
On Tue, Nov 8, 2016, 9:24 AM Ryan Doyle via CnC-List <cnc-list@cnc-list.com>
wrote:
Hey all,
A survey on a boat we are looking to buy turned up some elevated moisture
readings on the port side under the genoa track. I would do this repair myself
as I understand what needs to be done, however my wife is insisting I leave
this job to a very experienced professional.
In the affected area I need someone to remove the deck skin, remove the moist
core, and replace the core in a 2'x6' area except under the stanchion base and
genoa track where I would like it to be replaced with solid epoxy. Then finish
the job nicely.
Does anyone have any recommendations for work like this?
Thanks in advance,
Ryan
(Former 30mki owner)
Sent from my iPhone
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
