Did you set the drive configuration? It has a few options - for a while I ran mine with the old wheel drive (before I got the linear drive installed) and it had an option for that...
Graham Collins Secret Plans C&C 35-III #11 On 2016-07-02 8:16 PM, Edd Schillay via CnC-List wrote: Listers, "Finished" the install of my Raymarine EV200 in the Enterprise, all connected to my old Octopus 1012 pump and linear drive. The system powers on and I ran through the setup twice -- but no joy, the rudder doesn't move. The pump has four wires. Two, orange and black, are coming out of the black part of the pump. I connected those to the "motor" connectors on the ACU. The other two, both red, are coming out of the "front" end, which I connected to the "clutch" connectors on the ACU. The pump is at least 11 years old, possibly double that or even more. Any idea if I have the wiring backwards? How does one test a hydraulic pump? Any suggestions on troubleshooting? All advice greatly appreciated. All the best, Edd ------------------------------- Edd M. Schillay Starship Enterprise NCC-1701-B C&C 37+ | City Island, NY <http://www.starshipsailing.com>www.StarshipSailing.com<http://www.StarshipSailing.com> ------------------------------- 914.332.4400 | Office 914.774.9767 | Mobile ------------------------------- Sent via iPhone 6 iPhone. iTypos. iApologize _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
